CODA-500
1 / 1 PageView full catalog
CODA-500
Product catalog summary
General Specification
Product Name: Automatic COD Monitor
Model Name: CODA-500
Purpose: Measures COD concentration in water
Dimensions: 600(W)×510(D)×1600(H) mm
Mass: Approx. 150 kg
Power Source: 100-240V AC±10% (50/60 Hz)
Power Consumption: 100-120 AC: Approx. 250VA, 120-240 AC: Approx. 350VA
Installation: Indoor, Overvoltage category II, Pollution level 2
Product Name: Automatic COD Monitor
Model Name: CODA-500
Purpose: Measures COD concentration in water
Dimensions: 600(W)×510(D)×1600(H) mm
Mass: Approx. 150 kg
Power Source: 100-240V AC±10% (50/60 Hz)
Power Consumption: 100-120 AC: Approx. 250VA, 120-240 AC: Approx. 350VA
Installation: Indoor, Overvoltage category II, Pollution level 2
Performance
Measurement Range: 0-20 mg/L to 2000 mg/L (various ranges)
Repeatability: Within ±1% to ±5% F.S. depending on range
Stability: Zero drift within ±3% to ±5% F.S. over 24 hours
Measuring Principle: Acidic and Alkaline potassium permanganate methods at 100ºC
Measurement Points: Standard 1 point, optional 2 points
Measurement Interval: 60 minutes
Conditions: Ambient temperature 2-40 ºC, Humidity 85% max.
Measurement Range: 0-20 mg/L to 2000 mg/L (various ranges)
Repeatability: Within ±1% to ±5% F.S. depending on range
Stability: Zero drift within ±3% to ±5% F.S. over 24 hours
Measuring Principle: Acidic and Alkaline potassium permanganate methods at 100ºC
Measurement Points: Standard 1 point, optional 2 points
Measurement Interval: 60 minutes
Conditions: Ambient temperature 2-40 ºC, Humidity 85% max.
Sample Water Conditions
Temperature: 2-40 ºC
Flow Rate: 2-20 L/min or 5-20 L/min depending on tank
Chloride Ion Concentration: Varies by method
Sampling Point: Within 3 m from main unit
Temperature: 2-40 ºC
Flow Rate: 2-20 L/min or 5-20 L/min depending on tank
Chloride Ion Concentration: Varies by method
Sampling Point: Within 3 m from main unit
Blank Water Conditions
Supply Method: Tap water or optional pure water tank
Water Quality: Tap water without COD, hardness 100 mg/L max.
Water Supply Pressure: 100-500 kPa
Consumption: 20-420 mL depending on setup
Supply Method: Tap water or optional pure water tank
Water Quality: Tap water without COD, hardness 100 mg/L max.
Water Supply Pressure: 100-500 kPa
Consumption: 20-420 mL depending on setup
Installation Conditions
Location: Well-ventilated, flat, stable, free from dust and corrosive gases
Location: Well-ventilated, flat, stable, free from dust and corrosive gases
Input/Output Specification
Display: LCD color touch panel
Analog Output: Standard 3 points, optional 6 points
Contact Output: Standard 14 points, optional 21 points
Analog Input: Standard 1 point, optional 2 points
Contact Input: Standard 9 points, optional 17 points
Display: LCD color touch panel
Analog Output: Standard 3 points, optional 6 points
Contact Output: Standard 14 points, optional 21 points
Analog Input: Standard 1 point, optional 2 points
Contact Input: Standard 9 points, optional 17 points
Functions
Includes measurement start, calibration, cleaning, and various error and status outputs
Load Calculation: COD load calculation
Memory: 1 year, external USB memory
Communication: RS-485 standard, optional RS-232C, Modbus® protocol
Printer: Standard 58 mm with automatic take-up device
Includes measurement start, calibration, cleaning, and various error and status outputs
Load Calculation: COD load calculation
Memory: 1 year, external USB memory
Communication: RS-485 standard, optional RS-232C, Modbus® protocol
Printer: Standard 58 mm with automatic take-up device
See more
Catalog excerpts
*1 Channel-based compatibility with the former CODA-200 series products is available (standard). *2 Within ±5% F.S. in case options (2 points measurements, 2 ranges, line cleaning by reagent etc) are added, and when using cleaning function of CODA-500C. *3 If tap water is used, first perform flushing for about 30 minutes and then send tap water to the CODA-500. For the version using a tank, use pure water of 10 mS/m (=1.0 • S/cm) maximum.
Open the catalog to page 1All HORIBA Process & Environmental catalogs and technical brochures
SLFA-60.6000 catalog4 Pages
EMIA Series catalog6 Pages
EMIA-STEP catalog2 Pages
EMGA-921 catalog4 Pages
Ultima Expert LT4 Pages
LA-3504 Pages
LA-96010 Pages
HT-110_TOC2 Pages
XGT-7200 catalog8 Pages
LAQUAtwin6 Pages
LAQUA series20 Pages
51 series2 Pages
VA-5000 Analyzer1 Page
B-340 series2 Pages
SEC-Z500X series13 Pages
Water quality analyzer12 Pages
Compact Water Quality Meter11 Pages
IG Series4 Pages
TW-1004 Pages
INM-7004 Pages
ENDA-40002 Pages
GA-360E Series2 Pages
PA-10002 Pages
IG-4102 Pages
Infrared Thermometers8 Pages
Conductivity/Resistivity Meters16 Pages
U-50 Series8 Pages
VA-3000 Series10 Pages
XE multi-gas CEMS2 Pages
AP-370 Series12 Pages
Archived catalogs
B-700series5 Pages
Related Searches
- Measuring device
- Gas analyzer
- Concentration analyzer
- Monitoring analyzer
- Liquids analyzer
- Automatic analyser
- Benchtop analyser
- Solids analyser
- Spectrometer
- Process analyzer
- Portable analyzer
- Industrial thermometer
- Continuous analyzer
- Water analyzer
- Integration analyzer
- Oxygen analyzer
- IR pyrometer
- Digital gauge
- Digital analyzer
- Compact analyzer
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.