*mydirectindustry

Catalogs
HONSEL-Group
Honsel rivet nut "headless"

Honsel rivet nut "headless"

Product catalog summary

Overview: The HONSEL Rivet Nut "headless" is designed for both existing and new applications, allowing for flush mounting in smooth bores without the need for countersinking. This feature offers significant cost savings by eliminating the countersink process. The rivet nut's 0 mm protrusion ensures that components can be mounted without interfering edges, allowing them to slide over one another without obstruction.

Specifications:

Protrusion: 0 mm
Material: Steel
Clamping Range: 2.5 - 5.5 mm
Length: Varies by model (18 mm for M6, 19 mm for M8, 22 mm for M10)
Setting Force: Maximum varies by model (10,000 N for M6, 15,000 N for M8, 25,000 N for M10)
Tightening Torque: Minimum varies by model (10 Nm for M6, 24 Nm for M8, 48 Nm for M10)
Axial Test Force: Minimum varies by model (15,000 N for M6, 23,500 N for M8, 37,000 N for M10)

Advantages:

Flush mount in smooth bores
No countersink required
Protrusion 0 mm
No interfering edges
High-quality corrosion protection with zinc-nickel coating, offering 720 hours of salt spray test resistance

Compatibility: Existing HONSEL standard setting tools can be used, including manual hand-held, pneumatic/hydraulic, and battery-powered setting tools with an adapted mouthpiece.

Contact Information:

Trade and Industry: HONSEL Distribution GmbH & Co. KG, Friedrich-Wöhler-Str. 44, D-24536 Neumünster, Phone: +49-(0)4321-96 71 71
Automotive: HONSEL Umformtechnik GmbH, Wernher-von-Braun Str. 2, D-58730 Fröndenberg/Ruhr, Phone: +49-(0)2373-7550
Email: [email protected]

Catalog excerpts

HONSEL RIVET NUT “headless” FLUSH MOUNT BLIND RIVET NUT ü ü Protusion 0mm Flush mount in smooth bo

Open the catalog to page 1

HONSEL RIVET NUT „headless“ Flush mounted blind rivet nut, Protusion 0mm. The HONSEL RIVET NUT “headless” can be used in existing and new applications. The blind rivet nut can be flush mounted in smooth bores without countersinking. The omission of the “countersink” process of the hole realizes enormous potential for savings. Due to the 0 mm protrusion, components can be mounted without interfering edges or slide over one another without obstruction. Existing HONSEL standard setting tools can continue to be used. The use of manual hand-held setting tools, pneumatic/hydraulic setting tools and...

Open the catalog to page 2

All HONSEL-Group catalogs and technical brochures

Archived catalogs

Honsel battery riveters
4 Pages