Cutting, Drilling and Beveling
18Pages

Cutting, Drilling and Beveling

Product Description • Jk114 is designed fo cut holes up to 114mm into steel pipe. The multiple holes sizes allow the use of fittings for branching unpressurized pipe lines. • Light weight for easy transportation, ideal for the hole cutting in small sizes. Induction motor ensure quiet working performance. Specifications • Cutting Capacity: up to 114mm • Pipe Mounting Capacity: 1 1/4"-8" (OD: 42mm-219mm) • Drill Chuck Capacity: 3-16mm • Drill Chuck Speed: 110RPM (no load) • Motor: induction, 550W • Height: 513 mm • Length: 260 mm • Width: 248 mm

Product Description • The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152 mm into steel pipe. • The multiple hole sizes allow the use of fittings for branching unpressurized pipe lines. • The JK150 has a 5/8" (16 mm) capacity drill chuck to accommodate all sizes of hole saws and hole saw arbors. • An integral motor and gear reduction optimizes performance of large diameter hole saws. • The dual-side feed handle allows the operator to use the Hole Cutting Tool from either the left or right side. Specifications • Cutting Capacity: Up to 152 mm • Pipe Mounting Capacity:...

Hole saws Product Description • Excellent performance and long-lasting life. • Bi-metal construction with teeth made from specially hardened M3 or M42 high speed steel. The varying teeth height and gullet sizes result in much faster cutting and longer life. Suitable for various material like mild steel, tool and stainless steel, brass, aluminum, wood. Size ranges from 14mm to 210mm. • Use high quality thread cutting oil on all metal except cast iron Ordering Information

Hydraulic Power Pipe Cutters QG Product Description • The Model QG8C-A Hydraulic Power Pipe Cutter cuts 2" to 8" schedule 10/40 steel pipe, galvanized pipe at the job site or in the shop. The operator controls the feeding rate by pumping the hydraulic pump troughout the operation. • The QG8C-A cus pipes with clean cutting edge, no spark, dust or open flame. The processed pipes can be threaded or grooved with no extra processing. An induction motor insures very quiet operation. Features • Easily cuts by displacing instead of removing pipe material. • No abrasive dust, dangerous spark, or...

Product Description • The Model QG12C Hydraulic Power Pipe Cutter offers 2" to 12" schedule 10/40 cutting range. Utilizing displacement type cutter wheel technology. The operator controls the feeding rate by pumping the hydraulic pump troughout the operation. The QG12C cuts pipe with clean cutting edge, no sparks, dust or open flame. The processed pipes which by QG12C can be threaded or grooved with no extra processing. An induction motor insures very quiet operation. Features • Easily cuts by displacing instead of removing pipe material. • No abrasive dust, dangerous sparks, or open flame....

C-Narrow Design Pipe Beveling Machine Product Description • This machine is effective, ideal and reliable solution to precisely square cut and bevel for all types of metal pipes/ tubes. All saw-bladed pipe cutters with precise, square and clean cut, which save any additional preparation work on the cut-off face for orbital welding. • The cut/beveled pipe is free from burr and deformation because of high quality saw blades. It is the best choice for direct S.S pipe welding on catering. pharmacy, semiconductor optoelectronics, biology, chemical industry, oil and gas, water treatment,...

Split Frame Pipe Cutting and Beveling Machine Product Description • Split frame technology, easy to install in pipeline. • Electric: Driven by low-energy consumption electric motor. 110V or 220V, 50-60Hz • Out mounted, clamping by multipoint jaws. • Cold cutting, don’t influence the pipe’s material. • Pneumatic: Drive by pneumatic motor. Air working pressure: 0.6-0.8Mpa, Air Consuming flux:650-960L/min • Auto feed, Cutting and Beveling the pipe at the same time, cost effective. • Var ie t y o f b e v elin g sh ap e: “U ”, “ V ”, “J”, double “V”compound bevels. • Can process material: carbon...

Split Frame Pipe Cutting and Beveling Machine Machine Body and Material • Numerical controller: Driven by the high-power servo motor and PLC control system. Timing range: 0-20 RPM, Power 2.0-5.5KW, 220-230V, 50-60Hz. • Standard Model:Alloy steel with ionic treatment. The weight is a little heavy, but sturdy and durable. • Hydraulic: Driven by hydraulic motor, Rated pressure: 16Mpa, Rate Flux; 25L/min, output torque 260 NM, Electric power: 7.5KW, 380V-3Ph. Numerical Controller • Light Model: Aerospace grade Aluminum alloy or Hollowout alloy steel. Light weight and suitable for high-altitude...

CUTTING AND BEVELINGMachine Body Size ^^\^Model No. Specifications Beveling Types Other bevel angles or alloy steel, cast steel, please declare before order. Tools Standard tools Standard tools attached (high speed steel, wall thickness <25mm), If customers need other degrees cutting tools or wall thickness 25mm, please inform us before order.

Product Description • Inner mounted quickly and easily, self located in center of the pipe. • Beveling and grooving with high speed, light weight, good rigdity. Used for the welding preparation. • Can process facing, flange, convex surface and seal groove. • Cold cutting process will not influence the quality of the material of the pipe. • High quality beveling tool, can process different grades of carbon steels, alloy steel, stainless steel and so on. • Can process the U, V and J shape of pipe beveling according to the requirements. Specifications • Electric: Driven by low-energy...

Product Description • The Beveling Machine adopts“Y" shape struction design, minimal radial space, light weight, easy to carry, safe use. • Inner mounted quickly and easily, self located in center of the pipe. • Beveling and grooving with high speed, light weight, good rigdity. Used for the welding preparation. • Can process facing, flange, convex surface and seal groove. • Cold cutting process will not influence the quality of the material of the pipe. • High quality beveling tool, can process different grades of carbon steels, alloy steel, stainless steel and so on. • Can process the U, V...