Catalog excerpts
Butterfly valves BVG, BVGF, BVA, BVAF, BVH, BVHS, BVHM Product brochure · GB 3 Edition 01.12 • • • • • • • • • • • For gas, air, hot air and flue gas Low leakage rate and pressure loss High control accuracy BVG and BVA with reduced nominal diameters Butterfly valve can be mounted directly onto the actuator IC 20 or IC 40 Suitable for intermittent operation BVGF, BVAF work clearance-free Low-maintenance operation BVG: EC type-tested and certified BVHM: FM approved BVG: certified pursuant to GOST-TR www.kromschroeder.com
Open the catalog to page 12 · BVG, BVGF, BVA, BVAF, BVH, BVHS, BVHM · Edition 01.12 BVG for gas, BVA for air. These butterfly valves can be fitted with an adapter set with square shaft, free shaft end or manual adjustment, for instance. BVG, BVA Application The butterfly valves are designed to adjust volumes of gas, cold and hot air and flue gas on various appliances and flue gas lines. They are designed for control ratios up to 1:10, and with the mounted actuator IC 20 or IC 40 they are suitable for regulating flow rates for modulating or stage-controlled combustion processes. BVG, BVA Using the adapter set with...
Open the catalog to page 2BVG, BVGF, BVA, BVAF, BVH, BVHS, BVHM · Edition 01.12 · 3 Example of applications IC 20 + BVG VAG M BVG, BVGF, lambda correction If the burner is to be operated with excess gas or air for reasons of the process operation, the butterfly valve BVG, BVGF can be used to correct the lambda value. The butterfly valve with manual adjustment is used to adjust the high-fire rate. IC 20 + BVA BVA M BVA, BVAF, adjusting the burner capacity In pneumatic systems, the butterfly valve with mounted actuator IC 20..E determines the air volume for the required burner capacity. VAG The butterfly valve with...
Open the catalog to page 34 • BVG, BVGF, BVA, BVAF, BVH, BVHS, BVHAA • Edition 01.12 Technical data BVG, BVGF: natural gas, town gas, LPG and other non-aggressive fuel gases. BVGF: biologically produced methane (max. must not contain condensate. Housing material: AISi, valve disc: aluminium, drive shaft: stainless steel, seals: HNBR. reduction by 2 nominal sizes is possible. Inlet pressure pu: max. 500 mbar (7.25 psi). Pressure differential between inlet pres- sure Pu and outlet pressure p^: max. 150 valve disc: stainless steel, drive shaft: stainless steel. Inlet pressure pu: max. 150 mbar (2.16 psi). Pressure...
Open the catalog to page 4All Honeywell Thermal Solutions catalogs and technical brochures
-
Thermal Solutions
12 Pages
-
COMBUSTION CATALOG
176 Pages
-
thermal IQ
4 Pages
-
Magnetic relief valves VAN
4 Pages
-
Tightness controls TC
12 Pages
-
Pressure switches for gas DG
4 Pages
-
Burners for gas BIC, BICA, ZIC
16 Pages
-
Valves and butterfly valves
8 Pages
-
E-SOLUTIONS FOR COMBUSTION™
4 Pages
-
Field bus interface PFA 700
28 Pages
-
Manual valves AKT
4 Pages
-
Gas Pressure Regulator GDJ
2 Pages
-
Gas Pressure Regulator VGBF
4 Pages
-
Thermal equipment trip TAS
4 Pages
-
Safety shut-off valve
2 Pages
-
Relief valves
2 Pages
-
BV.., IB..
8 Pages
-
Gasfilter GFK
4 Pages
-
HTS Engineered to order
8 Pages
-
Training Brochure 2019
17 Pages
-
HONEYWELL COMBUSTION SERVICE
4 Pages
Archived catalogs
-
Solenoid Valves for air VR
16 Pages
-
GIKH
2 Pages
-
GIK
2 Pages
-
IFD 450, IFD 454
34 Pages
-
pb_j78r_60dj_gb
2 Pages
-
pb_tas_akt_tas_gb 2007
6 Pages
-
Gear motors GT
4 Pages
-
Actuators IC 20, IC 40
8 Pages
-
Burner control unit CM 222
4 Pages
-
Control valves S11T
4 Pages
-
Burner control unit BCU 370
6 Pages
-
Product range
4 Pages