Optical Sensors Product Range Guide

For innovation that’s well apart, there’s only Honeywell Sensing and Control. With more than 50,000 products ranging from snap-action, limit, toggle, and pressure switches to position, speed, pressure, and airflow sensors, Honeywell Sensing and Control (S&C) has one of the broadest sensing and switching portfolios available. Honeywell sensor, switch, and control components are tailored to exact specifications for stronger performance, longer productivity, and increased safety. Enhanced accuracy and durability are built into every part, improving output and endurance. For our customers, this can...

Fiber Optics SERCOS Transmitters and Receivers SERCOS transmitters convert optical input into electrical signal and are designed for data transmission in industrial LAN applications. SERCOS receivers provide digital output to indicate presence or absence of liquid, and sealed products have reverse polarity and overvoltage protection. Housing style/material Data rate Fiber coupled output power Power dissipation Forward current Operating temp. range designed to work with HFD7000-XXX and HFD7500-XXX; super bright LED; enhanced power output and reliability designed to work with HFE7520-210; enhanced...

Fiber Optics Duplexers Duplexers contain two devices per module so they may communicate in opposing directions simultaneously and independently. May be used to multiplex two signals to a single fiber and where dual fiber solution is neither possible nor economical. Device location Device type transmit 1300 nm multimode laser Rise/fall time Fiber coupled power range Slope efficiency Forward voltage Threshold current Spectral bandwidth Response time Flux responsivity Dark current Reverse voltage Optical budget when used with corresponding duplexer Operating temperature range full duplex over single...

Infrared Sensors Encoder Detectors & Transmissive Encoders Encoder detectors are monolithic ICs that consist of two adjacent diodes, amplifiers, and Schmitt trigger output stages. Transmissive encoders contain an IR LED facing a dual output encoder in a plastic-molded housing, and the detector generates two output signals. Potential applications include printer and copiers, metering, data storage systems, motion control, scanning, medical equipment, and more. Output option speed/direction (tach output) Package style Tach pulse width Tach pulse level, active – Output rise/fall time Supply voltage...

Infrared Sensors Detectors: Photodarlington and Photodiode Photodarlington detectors provide non-linear, high gain analog output. Often used for lower available light inputs, greater detecting distances, or when higher current output is needed. Photodiode detectors offer very linear, high-speed analog output. Often used in encoders and data transfer applications. Package style coaxial, leaded case miniature pill Angular response Light current minimum Reverse breakdown voltage Dark current Rise/fall time Mounting configuration Termination style 0,46 mm [0.018 in] round leads min. lead length 25,0...

miniature pill coaxial, leaded case surface mount, glass lens 0,51 mm [0.020 in] sq leads min. lead length 12,7 mm [0.5 in] 0,51 mm [0.020 in] sq leads min. lead length 12,7 mm [0.5 in] 0,51 mm [0.020 in] sq leads min. lead length 12,7 mm [0.5 in] 0,46 mm [0.018 in] round leads min. lead length 25,0 mm [1.0 in] wide operating temperature range; can be directly mounted on pc-boards; mechanically and spectrally matched to SE2460 and SE2470 emitters linear response; enhanced response time; internal visible light rejection filter; mechanically and spectrally matched to SEP8506 and SEP8706 emitters...

Infrared Sensors Emitters: Metal and Plastic/Ceramic Packages Metal-packaged emitters are potentially used in commercial/industrial analog output applications and offer non-linear, fast-to-medium speed response with a glass lens that provides superior optics. Plastic/ceramic-packaged emitters are also potentially used in commercial/industrial applications when a consistent infrared light source is required. Package style coaxial, lead case coaxial, lead case miniature pill Beam angle Power output Output wavelength Spectral bandwidth Forward voltage Mounting configuration through-hole Termination...

miniature pill 0,46 mm [0.018 in] round leads min. lead length 12,7 mm [0.5 in] 0,46 mm [0.018 in] round leads min. lead length 12,7 mm [0.5 in] 0,46 mm [0.018 in] round leads min. lead length 12,7 mm [0.5 in] 0,46 mm [0.018 in] round leads min. lead length 12,7 mm [0.5 in] wide operating temperature range; can be directly mounted on pc-boards; mechanically and spectrally matched to SD2420, SD2440, and SD2410 wide operating temperature range; may be used with high-pulsed current applications; mechanically and spectrally matched to SD3421/5421, SD3443/5443/5491, SD3410/5410, and SD5600 side emitting...

Infrared Sensors Optoschmitt: Detectors and Sensors Detectors consist of a photodiode, amplifier, voltage regulator, Schmitt trigger, and output stage with a 10 kOhm pull-up resistor, open collector, or totem-pole output. IR LED sensors facing Optoschmitt detector in plastic molded housing – switching occurs when opaque object passes between emitter and detector. Digital output used for presence/ absence, motion sensing and encoding. Package style/ housing Package components Angular response Turn-on threshold irradiance Output logic Supply voltage (range) Output type Rise/fall time Propagation...

open collector/totem-pole 10 kOhm pull-up open collector/totem-pole 10 kOhm pull-up open collector/totem-pole mounting tabs 0,51 mm [0.020 in] sq leads min. lead length 12,7 mm [0.5 in] 0,51 mm [0.020 in] sq leads min. lead length 12,7 mm [0.5 in] 0,51 mm [0.020 in] sq leads min. lead length 10,8 mm [0.4 in] 0,51 mm [0.020 in] sq leads min. wire length 10,8 mm [0.4 in] 26 AWG wire leads min. lead length 610 mm [26 in] wide sensitivity ranges; TTL/ LSTTL/CMOS compatible; buffer logic; three different lead spacing arrangements wide sensitivity ranges; TTL/ LSTTL/CMOS compatible; inverting logic;...