V5005T
6Pages

Honeywell I Balancing valves V5005T Kombi-FCU Pressure independent balancing and control valve APPLICATION The V5005T Kombi-FCU is a Pressure Independent Control Valve (PICV). It combines a flow controller and a full stroke, full authority temperature controller in one valve. Equipped with an actuator Kombi-FCU provides a full stroke modulating temperature control. It is suitable for use in variable and constant flow systems. They may be used as constant flow limiter in constant flow systems (without an actuator) or as a Pressure Independent Control Valve in variable flow systems. V5005T Kombi-FCU is typically used for balancing and temperature control of fan coil units, chilled ceilings and one-pipe heating systems. SPECIAL FEATURES • Automatic pressure independent balancing and control - Precise pressure independent flow performance - Highest energy saving potential due to efficient energy transfer and minimised pump speed - Measuring possibility to find the optimal setpoint for the pump - Versions with or without measuring connections available - Reduced movements of actuators as pressure fluctuation do not influence the required temperature - No complex calculation needed for selection - No balancing method needed for commissioning • Wide range of application - Sizes DN15 to DN25 cover all popular sizes on FCUs - Various versions to support standard flow rates as well as low flow and high flow needs - Covers hydronic balancing and temperature control in one valve thus reducing mounting costs • Easy commissioning - Presetting with visual flow scale indicating directly the preset liters per hour - Presetting by hand without the need of tools - Can balance a system even if only some parts of a building are in operation • Maintenance friendly - Emergency shut-off function with plastic cap - not for permanent use - Measuring possibility for problematic applications (only with versions having measuring connections) - Dirt resistant - no dead zones in the valves. Continuous flow assures self cleaning effects Energy efficiency Commissioning effort Calculation effort Product Specification Sheet • EN0H-2329GE23 R0318 • Subject to cha

Product Specification Sheet • EN0H-2329GE23 R0318 • Subject to change

TECHNICAL CHARACTERISTICS Flow Data Differential pressures required for operating the valves at different presettings. Startup Pressure - required min. ∆p [kPa] Pressure ∆p [kPa] At min. At 25 % At 50 % At 75 % At 100 % flow flow flow flow flow 14 15 15 20 15 20 14 15 15 20 15 20 Flow Rate Working range Example of valve’s behavior for different settings (minimum, 25%, 50%, 75% 100%) Flow rate Example for V5005TY10201000: When the valve is set to 100 % of nominal flow, the curve begins to remain constant at 30 kPa, therefore the working range at 100 % setting is 30 - 400 kPa. When the valve...

Note: *Valve is set to minimum opening. Please refer to table on page 3 for other presettings. Product Specification Sheet • EN0H-2329GE23 R0318 • Subject to change

MT4 M4410 Actuator thermoelectric 4.0 mm effective stroke, 90N, on/off Actuator thermoelectric 4.0 mm effective stroke, 90N, on/off Actuator 3-point Note: By use of this actuator series the max. flow of the valve is reduced by 15 % 4.0 mm effective stroke, 90N, on/off Actuator thermoelectric 0 - 10 V Note: Closes when power fails 4.0 mm effective stroke, 100N, modulating Cable for M4410 actuator, 1 m, 10 pcs M7410E Actuator 0/2 - 10 V 2.9 mm effective stroke, 90N, modulating T750120 Radiator Thermostat Thera-2080WL With remote sensor for water and air VM242A BasicMes-2 handheld measuring...

Environmental & Energy Solutions Honeywell GmbH Hardhofweg 74821 MOSBACH GERMANY Phone: (49) 6261 810 Fax: (49) 6261 81309 http://ecc.emea.honeywell.com Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sarl, Z.A. La Piece 16, 1180 Rolle, Switzerland by its Authorised Representative Honeywell GmbH EN0H-2329GE23 R0318 Subject to change © 2018 Honeywell GmbH