FEATURES • Suitable for ON/OFF control without feedback • Short runtime • Electronic switch-off in the end position ensures longterm reliability and saves energy • Furnished with prewired connection cable • Simple, standardized valve/actuator coupling - thus, no tools required for mounting • Small size allows installation where space is limited • High resistance to glycol and other chemicals SPECIFICATIONS Input voltage M5410C1001 24 Vac ±20%, 50 Hz; APPLICATION The Honeywell M5410C1001 and M5410L1001 actuators are designed specifically to provide ON/OFF control in conjunction with the V5822/23 and V5832/33 series of small linear valves (DN15/20), the VSxF/VSxC series (DN15/20/25), as well as with the V100/V2000 TRV series. The M5410C1001 and M5410L1001 actuators are suitable for use in all kinds of fast-acting ON/OFF control systems, including boiler and solar systems, fan coil units, induction units, small reheaters, and recoolers as well as for zone control applications. They are employed in electronic temperature control systems using hot and/or cold water as the controlled medium. They are operated by an SPST signal. <8 W during operation <0.5 W in end position <1.8 W during operation <1.8 W in end position <10 mA 1 mA Control mode Stroke Runtime (push/pull) Stem force Protection standard Insulation class Connection cable Max. cable length Ambient operating limits Weight Suitable valves ON/OFF 6.5 mm approx. 1.8 mm/s and 0.4 mm/s 90 N (minimum) IP 54 II 1.5 m See section “Wiring” on pg. 2 0...60 °C 0.2 kg V5822/23, V5832/33 (DN15/20) VSxF/VSxC (DN15/20/25), and V100/V2000 TRV ® U.S. Registered Trademark Copyright © 2015 Honeywell Inc. • All rights reserved

M5410C1001 / M5410L1001 SMALL ON/OFF LINEAR VALVE ACTUATORS - PRODUCT DATA OPERATION The actuator movement is produced by a screw spindle driven in both directions through a set of gears by a d.c. motor. The motor is switched OFF electronically when the actuator has built up the closing force. The actuator is fixed to the valve body by means of a coupling ring requiring no tools for mounting. The actuator is maintenance-free and furnished complete with a ready-to-wire connecting cable. MOUNTING NOTE: The actuator may be mounted only either beside or above the valve. Adjust the valve in the proper...

M5410C1001 / M5410L1001 SMALL ON/OFF LINEAR VALVE ACTUATORS – PRODUCT DATA The electrical installation must comply with Fig. 3. M5410L1001 CAUTION  Newer models (identified by the subscript "2" at the end of the model number appearing on the manufacturer's plate, e.g., "M5410L10012") are protected against miswiring. Incorrect wiring will damage older models (lacking the subscript "2"). BLACK BROWN SPST BLUE The electrical installation must comply with Fig. 2. NOTE: The maximum permissible cable length (use 3 x 2 1.5 mm ) between the actuator and the controller is 40 m. If a suppression capacitor...

ACTION Closing the contact at the brown cable will drive the actuator to the "extended" position. Upon opening the contact, the actuator will drive back to the "retracted" position. CAUTION In case of power failure, the actuator will not necessarily stay at its current position. Rather, the actuator stem will retract to an extent depending upon the remaining charge in the actuator's capacitor. Thus, in the case of a “stem-up-to-open” valve, the valve may open slightly, allowing a minimum circulation of fluid in the system. Please NOTE that this is not a guaranteed safety function like that offered...