XNX™
2Pages

5 conduits/cable entries - (2 right, 2 left, 1 bottom) Available in %” NPT, or M25 Cable Entries Termination Mounting User interface Signal Environmental Temperature Humidity IP Rating Options Power Consumption XNX used with: electrochemical sensor: 6.2 watts; millivolt (catalytic bead or IR cell): 6.5 watts; point Infrared sensor (Searchpoint Optima): 9.7 watts; open-path Infrared (Searchline Excel): 13.2 watts Hazardous Area Approvals (Transmitter/Sensor Dependent) UL, cUL classified: UL 1203 and 913 Seventh edition; CSA, CSA 22.2 No. 30, CSA 22.2 No. 157 Class 1, Division 1, Groups B, C, D / Class 1, Zone 1, Groups IIB + H2 T4 Tamb -40c to 65c DEMKO* IEC 60079-0, 4th ED; IEC 60079-15th Ed; IEC 60079-11 5th Ed. NCC INMETRO* Type Approval: EX [ia]d IIB + H2 T4 Tamb -40c to 65c Performance Approvals (Sensor Dependent) Flammable gases: CSA 22.2 No. 152, FM* 6310, 6320, DEKRA/EXAM* IEC/EN 60079-29-1, EN 61779-4:2000 Toxic and Oxygen FM* ISA 92.0.01; DEKRA/EXAM* EN 45544:2000, EN 50104: 1999 Functional Safety: TUV EN 61508 SIL 2 Component Certification Display Type Information Displayed showing Base Information: Fault/Alarm and Operating Status Indication: Gas Reading; Gas Name and Units of measurement; Fault and Alarm Status; Large Numeric concentration or LEL display; Bar graph current reading, set points and full scale. Security settings allow multi level operator access for set-up, configuration and calibration Event history stores Time and Date of all Alarm, Diagnostic, Configuration events Magnetic wand with terminal screwdriver (supplied each unit) Description Non-intrusive Interface Operating Modes Output Range 4-20mA Signal Accuracy Max loop resistance Functions Supported via HART Fully configurable isolated 4-20mA & HART output module providing current sink, current source and isolated modes of operation. (supports HART 6.0 protocol) Optional local IS port to enable HOT connection of a HART handheld configurator Current sink / Current source / Isolated current sink /Conventional or with HART data 0 to 22mA +/- 1% FS 600 Ohms at 24Vdc loop supply Gas Reading Gas Name and Units of measurement 4-20mA signal level General/Device Information Installation Configuration Forcing of 4-20mA output Detailed Sensor Information Including: Optical Signal Level Dynamic Reserve (Excel Only) Raw reading 24V supply voltage Temperature RTC (Excel Only) Calibration and Configuration status Detailed Fault and Warning Information Fault and Alarm History Zero Calibration

Further information is available upon request. * Not available at time of publication. Please call your Honeywell Analytics sales person. XNXTM is a registered trademark of Honeywell International. HART® is a registered trademark of the HART Communication Foundation. MODBUS® is a registered trademark of Schneider Automation Inc. Foundation™ is a trademark of Fieldbus Foundation.