TBP Series
19Pages

BASIC BOARD MOUNT PRESSURE SENSORS TBP Series: Compensated/Unamplified 60 mbar to 10 bar | 6 kPa to 1 MPa |1 psi to 150 psi, Millivolt Analog Output NBP Series: Uncompensated/Unamplified 60 mbar to 10 bar | 1 psi to 150 psi, Millivolt Analog Output DESCRIPTION Honeywell’s Basic Board Mount Pressure Sensors, TBP Series and NBP Series, are designed for food grade and non-food grade potential medical and industrial applications. These unamplified, piezoresistive silicon pressure sensors provide a ratiometric output and are either temperature compensated (TBP Series) or uncompensated (NBP Series). TBP Series: • Temperature compensated and unamplified. • Compensation makes it easier to integrate the sensor into a system by minimizing the need to calibrate the system over temperature on a regular basis; offers reduced part-to-part variation. • Offers multitude of resolutions of the pressure signal. • Compensated temperature range is 0°C to 85°C [-32°F to 185°F]. NBP Series: • Uncompensated and unamplified. • Is often ideal for customers who want to do their own compensation, calibration and amplification in order to make use of the maximum resolution of the bare sensor output, leveraging any algorithm needed for the application. • Offers multitude of resolutions of the pressure signal. These products are available in numerous package styles and mounting options, making it easier for device manufacturers to integrate the product into their applications. They are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases, and for non-corrosive, non-ionic liquids when the silicone gel coating option is selected. All products are designed and manufactured according to ISO 9001 and are NSF certified. Specific configurations are food grade certified. Consult the factory for food grade options. VALUE TO CUSTOMERS • Cost-competitive pressure sensing solution • Smaller when compared to many similar products, occupying less space on the printed circuit board (PCB) and typically allowing for easier placement on PCBs or in small devices • Performs in many tough environments with dry and wetted media • Numerous options simplify integration into the device manufacturer’s application • Food Safety Certification for North America, Europe and Asia FEATURES • Package size as small as 7 mm x 7 mm [0.276 in x 0.276 in] • Operating temperature range -40°C to 125°C [-40°F to 257°F] • Reflow mounting J-STD-020E, MSL 1 and rapid stabilization after reflow soldering allow calibration immediately after mounting • Media compatibility options: - No gel coating in media path: Input port is limited to non-corrosive, non-ionic media such as dry air and gases and should not be exposed to condensation; gases are limited to media that are compatible with high temperature polyamide, silicone, alumina ceramic, silicon, gold and glass - Silicone gel coating in media path: Uses the same materials in the wetted media path but is protected from condensation by a silicone-based gel coating; allows for use in applications where condensation can occur • For selective configurations, sensor materials have been tested and certified for these food safety standards (applies to specific configurations only): - NSF-169 - BPA Free - LFGB POTENTIAL APPLICATIONS • Medical: Blood pressure monitoring, hospital beds, oxygen concentrators, wound therapy • Industrial: Air movement control, environmental control, HVAC transmitters, industrial controls, leak detection, other commercial applications, pneumatic controls, food and beverage Honeywell offers a variety of board mount pressure sensors for use in potential medical and industrial applications. To

TBP SERIES AND NBP SERIES BASIC BOARD MOUNT PRESSURE SENSORS TABLE OF CONTENTS TBP Series and NPB Series General Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 TBP Series Nomenclature and Order Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 NBP Series Nomenclature and Order Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

TBP SERIES AND NBP SERIES BASIC BOARD MOUNT PRESSURE SENSORS TABLE 3. ABSOLUTE MAXIMUM RATINGS1 CHARACTERISTIC Supply voltage (Vsupply) Storage temperature Soldering time and temperature: lead solder temperature (DIP) peak reflow temperature (SMT, Leadless SMT) 1 Absolute maximum ratings are the extreme limits the device will withstand without damage. TABLE 4. ENVIRONMENTAL SPECIFICATIONS CHARACTERISTIC Humidity: all external surfaces internal surfaces of silicone gel coating option internal surfaces of no gel coating option 0 %RH to 95 %RH, non-condensing 0 %RH to 100 %RH, condensing 0 %RH...

TBP SERIES AND NBP SERIES BASIC BOARD MOUNT PRESSURE SENSORS FIGURE 1. TBP SERIES NOMENCLATURE AND ORDER GUIDE (PART ORDER QUANTITY MUST MEET MOQ REQUIREMENTS.) E For example, TBPDANN150PGUCV defines a TBP Series Basic Board Mount Pressure Sensor, DIP package, AN pressure port, no gel coating in media path, 150 psi gage pressure range, unamplified, compensated, constant supply voltage. Supply Voltage L Leadless SMT (Surface Mount Technology) M SMT (Surface Mount Technology) D DIP (Dual Inline Pin) Pressure Port Leadless SMT axial AN Singlebarbed small port3 SMT axial AN Singlebarbed small...

TBP SERIES AND NBP SERIES BASIC BOARD MOUNT PRESSURE SENSORS FIGURE 2. NBP SERIES NOMENCLATURE AND ORDER GUIDE (PART ORDER QUANTITY MUST MEET MOQ REQUIREMENTS.) For example, NBPDANN150PGUNV defines an NBP Series Basic Board Mount Pressure Sensor, DIP package, AN pressure port, no gel coating in media path, 150 psi gage pressure range, unamplified, uncompensated, constant supply voltage. Supply Voltage L Leadless SMT (Surface Mount Technology) M SMT (Surface Mount Technology) D DIP (Dual Inline Pin) Pressure Port Leadless SMT axial AN Singlebarbed small port3 SMT axial AN Singlebarbed small...