*mydirectindustry

HS50B Datasheet

Product catalog summary

Application
The HS50B Shaft Type Encoder is designed for use in industry machines and automated equipment.

Features
The encoder boasts a reliable and sturdy design, small size for easy mounting, ESD protection (IEC61000−4−2), reverse connection protection, and short-circuit protection.

Resolution
Available resolutions include 50, 100, 200, 360, 400, 500, 512, 600, 625, 720, 800, 1000, 1024, 1200, 1250, 1440, 1600, 2000, 2048, 2400, and 2500 P/R. Note that 50, 100, and 200 P/R are not available with Line driver & Push pull.

Electrical Specifications
The encoder supports various electrical configurations with supply voltages ranging from 4.5 to 30V and a maximum supply current of 80mA or 100mA. It features signal outputs A, B, Z, and their complements, with a maximum frequency of 300kHz or 500kHz depending on the configuration.

Mechanical Specifications
Shaft diameters range from 4mm to 10mm, with a starting torque of less than 0.8 Ncm. The encoder can handle radial shaft loading of 40 N and axial loading of 20 N, with a maximum RPM of 6000 or 12000. It weighs 100g.

Environmental Specifications
Operating and storage temperatures range from -20 to +85°C, with a maximum operating humidity of 95% RH. The encoder is protected against shock and vibration and has an IP54 protection rating.

Connection
The encoder uses UL2464 or UL2517 cables with various pin configurations for signal transmission.

Output Waveform
The encoder provides different output waveforms depending on the direction of rotation, with A leading B for counterclockwise rotation and B leading A for clockwise rotation.

Output Circuit
The encoder supports voltage output, push-pull, open collector, and line driver configurations.

Ordering Information
The ordering code includes shaft diameter, output circuit type, resolution, phase, supply voltage, and cable length.

Catalog excerpts

Shaft Type Encoder ● Application ‧ Industry Machine ‧Automated Equipment ● Feature ‧Reliable sturdy design ‧Small Size & Easy Mounting ‧ESD (IEC61000− 4− 2) ‧Reverse connection protection ‧Short-Circuit protection ● Electrical Z□VH、Z□VT Z□OH、Z□OT Supply voltage* Output voltage Max. output current * Ripple < 100mVp-p ● Mechanical Spec Shaft Diameter Starting Torque Shaft Loading Operating Temp. Storage Temp. Operating Humidity Vibration Protection

Open the catalog to page 1

Shaft Type Encoder ● Connection Signal：A, B, Z (UL2464、AWG 26、5pin + shield) Red Counterclockwise rotation: A leads B Clockwise: B leads A ● Output Circuit Voltage output Push pull Open collector Copyright © 2019 HONEST SENSOR Version 1.1 [email protected] www.ho

Open the catalog to page 2

HS50B Shaft Type Encoder ● Ordering Information HS50B - XXXX - X X X X - RXXX Resolution Cable length Supply voltage Voltage output(NPN) Open collector(NPN) Push pull Push pull(with inverted signal) Line driver Output circuit Copyright © 2019 HONEST SENSOR Version 1.1 [email protected] www.honestse

Open the catalog to page 3

Open the catalog to page 4

All HONEST SENSOR Corp. Taiwan catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list