*mydirectindustry

HS40A Datasheet

Product catalog summary

Application
HS40A Encoder Modules are designed for use with stepping motors and automated equipment.

Features
The modules feature a reliable and sturdy design, compact size, and easy mounting.

Resolution
Available resolutions range from 600 to 16000 pulses per revolution (P/R).

Electrical Specifications

Output circuits include Z□VH, Z□VT, Z□OH, Z□OT, Z□PH, Z□PT, Z□LH, Z□LT.
Supply voltage options are 8-28V or 4.5-5.5V.
Maximum supply current varies from 80mA to 110mA.
Signal types include A, B, Z and their differential counterparts.
Rise/fall time ranges from 10ns to 250ns.
Frequency capabilities range from 300kHz to 1.5MHz.
Output voltage levels: High (VCC – 2V or 2.4V min.), Low (0.5V max.).
Maximum output current is 20mA or 100mA.

Mechanical Specifications

Hollow diameter options: 5, 6, 6.35, 8mm.
Housing material is PC.
Maximum RPM is 7500.
Net weight is 60g.

Environmental Specifications

Operating and storage temperature: -20 to +85℃.
Operating humidity: 85% RH max, non-condensing.
Shock resistance: 490 m/s², 3Dx2 times.
Vibration resistance: 1.2mm, 10-55KHz, 3Dx30min.
Protection level: IP 40.

Connection
Signal connections are available for both single-ended and differential signals, with compatible headers and specified wire colors.

Output Waveform
The output waveform is specified for counter-clockwise shaft rotation with A leading B.

Output Circuit
Options include voltage output, push-pull, open collector, and line driver configurations.

Ordering Information
Various configurations are available based on output circuit, supply voltage, resolution, and mechanical specifications.

Cable Introduction
Cable lengths are available in 305mm and 500mm for different output types.

Setting Dimension
Mounting screw size is M3 x 5mm, with specified tolerances for axial, radial, and concentric angle assembly.

Catalog excerpts

HS40A Encoder modules ● Application ‧Stepping Motor ‧Automated Equipment ● Feature ‧Reliable sturdy design ‧Small Size ‧Easy Mounting ● Electrical Spec Resolution Output circuit Supply voltage Outout voltage Hollow Diameter Operating Temp. Housing material Storage Temp. Operating Humidity Shock Vibration Protection Copyright © 2019 HONEST SENSOR Version 1.8 [email protected] www.honestsensor.com

Open the catalog to page 1

HS40A Encoder modules ● Connection Signal：A, B, Z (UL2464、AWG 26、5pin + Shield) JST-S6B-ZR-SM4A-TF (Compatible headers) Red ● Output Waveform Shaft rotation CCW Shaft rotation CCW ● Output Circuit Voltage output Push pull Open collector Copyright © 2019 HONEST SENSOR Version 1.8 [email protected] www.honestsensor.com

Open the catalog to page 2

HS40A Encoder modules ● Ordering Information HS40A - XXXX - X X X X - X X - NXXX Resolution Default Ears Closed cover Supply voltage Voltage output(NPN) Open collector(NPN) Push pull Push pull(with inverted signal) Line driver Copyright © 2019 HONEST SENSOR Version 1.8 [email protected] www.honestsensor.com

Open the catalog to page 3

HS40A Encoder modules ● Cable Introduction ＜Voltage output / Open collector / Push pull＞ Cable length：305、500mm ＜Line driver＞ Copyright © 2019 HONEST SENSOR Version 1.8 [email protected] www.honestsensor.com

Open the catalog to page 4

HS40A Encoder modules ● Setting Dimension Mounting Screw Size：M3 x 5mm Axial assembly tolerance Radial assembly tolerance Copyright © 2019 HONEST SENSOR Version 1.8 [email protected] www.honestsensor.com Concentric angle tolerance

Open the catalog to page 5

All HONEST SENSOR Corp. Taiwan catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list