Specifications:
The document provides specifications for two models of indexing equipment: CS-6" and CS-8". Key dimensions are given in millimeters, including outer diameter, thickness, and various other measurements critical for installation and operation. The CS-6" model has a face plate outer diameter of 250 mm, while the CS-8" model has 310 mm.

Super Indexing Spacer:
This model includes all features of the Simple Indexing Spacer, with the addition of a worm gear and face plate. It can function as a dividing head with an optional dividing plate set. The worm is hardened and precision-ground to reduce wear.

Optional Accessories:
- Tail Stock: TS-4 for CS-6", TS-5 for CS-8"
- Dividing Plate Set: DP-4 for CS-6", DP-5 for CS-8"
- 3-Jaw Chuck: 6" for CS-6", 8" for CS-8"

Dividing Plate Set:
Models DP-4 and DP-5 are available, with a variety of hole numbers on A and B plates, allowing for precise indexing capabilities. The A Plate includes holes ranging from 26 to 59, while the B Plate includes holes from 61 to 99.

Additional Information:
An "Operation and Service Manual" is included for reference, ensuring proper use and maintenance of the equipment.