*mydirectindustry

Catalogs
HOMGE MACHINERY IND. CO., LTD.
HSD-7 Super Divider (Quick and 24 Divisions)

HSD-7 Super Divider (Quick and 24 Divisions)

Product catalog summary

Overview: The document provides technical specifications and operational guidelines for the Super Divider Model HSD-7”. It highlights features such as superior accuracy, one-touch operation, and energy-saving capabilities.

Specifications: The Super Divider is made from FCD 55 ductile iron and measurements are provided in both millimeters and inches. Key dimensions include:

Direct Indexing: 2, 3, 4, 6, 8, 12, 24
Dimensions: C (138 mm / 57/16"), D1 (192 mm / 79/16"), E1 (230 mm / 91/16"), E2 (80 mm / 35/32"), W1 (16 mm / 5/8")
Weight: 36 kg
Additional Dimensions: L1 (260 mm / 101/4"), L2 (160 mm / 61/4"), L3 (273 mm / 103/4"), L4 (132 mm / 513/64")
Internal Diameter: Max. 56 mm (21/4")
Permissible Load: Max. 50 kg (110 lb)

Optional accessory includes a 7” 3-Jaw Chuck.

Operation: The division settings are adjusted by turning Selector Pins with a screwdriver. Key operational steps include:

Ensure the Lever is not moved until the Divider is fitted on the machine table.
Return the Lever to the clamped position after each movement to avoid jamming.
If the Lever jams, adjust the Selector Pin to free it.
Do not start machining until the Table is stopped and clamped.
Use the Lever to unclamp, index, and clamp the Table, which is facilitated by the unique ‘HOMGE’ design.

Important Notes: For repeated operations, always return the Lever to the starting point after each division. The design allows for easy selection of dividing positions with one-hand operation.

Caution: Follow the operational guidelines to prevent equipment damage and ensure safety.

Catalog excerpts

HSD-7 Super Divider (Quick and 24 Divisions) -1

SUPER DIVIDER Model: HSD-7” • Superior accuracy • “One -Touch” Operation • Saves energy OPTIONAL ACCESSORY: • 7” 3-Jaw Chuck ( Material: FCD 55. Ductile lron ) DIRECT INDEXING Permissible Load

Open the catalog to page 1

HSD-7 Super Divider (Quick and 24 Divisions) -2

OPERATION • Set the divisions by turning the required Selector Pins through half a turn with a Screw Driver. • Moving the Lever clockwise will unclamp the Table and rotate it to the next selected division. • The Table will be stopped at the division by the plunger. • The Table is clamped when the Lever is returned to it’s original position. EASY SELECTION OF DIVIDING POSITIONS The division are easily and quickly set by simply turning the Selector Pins through half a turn with a Screwdriver. Only one hand is required to unclamp, index and clamp the Table due to the unique ‘HOMGE’ design. Lever...

Open the catalog to page 2

All HOMGE MACHINERY IND. CO., LTD. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list