COMBO PLATES for Zero Point Quick Clamping Systems

Product catalog summary

Overview: The document discusses the Zero-Point Quick Change Devices, specifically focusing on the Combo Plates offered by HOMGE Machinery Ind. Co., Ltd. These plates integrate 52 mm and 96 mm pull-stud patterns into a single design, maintaining sub-micron repeatability and allowing for direct, drop-in fit for fixtures from either standard.

Key Features:

Dual Compatibility: The Combo Plates support both 52 mm and 96 mm pull-stud patterns, simplifying fixture planning and eliminating the need for adapters. This reduces stack height and collision risk, especially beneficial for 3-, 4-, and 5-axis machines.
Design and Specifications: The document provides specifications for two models:
- M-52/96 (8288G): Size Ø246x30 mm, Weight 10.6 kg, Pull Studs M-52x52PS / M-96x96PS.
- M-52/96 (8287G): Size 192x192x30 mm, Weight 9.4 kg, Pull Studs M-52x52PS / M-96x96PS.

Benefits: The dual compatibility of the Combo Plates offers significant advantages in fixture planning and machine setup, enhancing operational efficiency and reducing potential for errors.

Catalog excerpts

COMBO PLATES for Zero Point Quick Clamping Systems-1

COMBO Plate unites 52 mm and 96 mm pull-stud patterns in a single design, preserving the sub-micron repeatability of our Zero-Point series while giving fixtures from either standard a direct, drop-in fit. For almost every plate in the range, a COMBO version is available, so system changeovers never limit your setup options. ZERO POINT QUICK CHANGE DEVICES / COMBO PLATES Combo Plates Dual compatibility brings two clear gains. Fixture planning becomes straightforward—vises, risers, or cubes can be swapped without worrying about stud spacing—and eliminating adapters trims the stack height, freeing valuable envelope on 3-, 4-, and 5-axis machines and reducing collision risk. © 2026 COPYRIGHT. HOMGE MACHINERY IND. CO., LTD.

Open the catalog to page 1