CLAMPING BRIDGES for Zero Point Quick Changing Devices

Product catalog summary

Technical Support and Custom Solutions
The engineering team provides custom adapters, L-blocks, and air-or-oil routing solutions tailored to specific rotary units. This support facilitates integration and enhances confidence in high-mix, low-volume production environments.

Clamping Bridges Overview
The Clamping Bridge system integrates the Zero-Point interface onto 4-axis rotary bridge plates, transforming a 3-axis mill with a fourth-axis table into a flexible production cell. This system replaces dedicated pallets with a single, repeatable locating grid, allowing for diverse part production without re-engineering setups.

Specifications of Clamping Bridges

Single Clamping Bridge: Size: 576x192x30 mm, Weight: 24.3 kg, Pull Studs: M-96x96PS, Accessories include cover plugs and a remover.
Twin Clamping Bridge: Size: 550x156x60 mm, Weight: 34.2 kg, Pull Studs: M-52x52PS, Accessories include cover plugs and a remover.
Combo Clamping Bridge: Size: 600x192x60 mm, Weight: 45.9 kg, Pull Studs: M-52x52PS / M-96x96PS, Accessories include cover plugs for both sizes and a remover.

Standard Accessories
Each clamping bridge comes with standard accessories such as cover plugs, cover plugs with hooks, and a cover plug remover, ensuring ease of use and maintenance.

Catalog excerpts

CLAMPING BRIDGES for Zero Point Quick Changing Devices-1

58 ZERO POINT QUICK CHANGE DEVICES / CLAMPING BRIDGE Clamping Bridges BRIDGE brings the Zero-Point interface onto 4-axis rotary bridge plates, turning a 3-axis mill plus a fourth-axis table into a genuinely flexible cell. A single, repeatable locating grid replaces dedicated pallets and unifies fixture management, so every station can run any mix of parts without re-engineering the setup. Beyond the plate itself, our engineering team provides the custom adapters, L-blocks, and air-or-oil routing solutions you need, tuned to your specific rotary unit. This technical support removes the usual integration hurdles and lets you step into high-mix, low-volume production with confidence.

Open the catalog to page 1

CLAMPING BRIDGES for Zero Point Quick Changing Devices-2

ZERO POINT QUICK CHANGE DEVICES / CLAMPING BRIDGES / SINGLE CLAMPING BRIDGE Clamping Bridge Single Clamping Bridge Pull Studs Mounting Holes Standard Accessories Cover Plug M-96x96CPS x 12 pcs Cover Plug with Hook M-96x96H x 2 pcs Cover Plug Remover x 1 pc © 2026 COPYRIGHT. HOMGE MACHINERY IND. CO., LTD.

Open the catalog to page 2

CLAMPING BRIDGES for Zero Point Quick Changing Devices-3

Clamping Bridge Twin Clamping Bridge Pull Studs Mounting Holes Standard Accessories Cover Plug M-52x52CPS x 32 pcs Cover Plug with Hook M-52x52H x 2 pcs Cover Plug Remover x 1 pc ZERO POINT QUICK CHANGE DEVICES / CLAMPING BRIDGES / TWIN CLAMPING BRIDGES

Open the catalog to page 3

CLAMPING BRIDGES for Zero Point Quick Changing Devices-4

Clamping Bridge (Combo)Twin Clamping BridgeM-52/96 (80722G) Size 600x192x60 mm Mounting Holes -Weight (kg) 45.9 standard Cover Plug M-52x52CPS x 24 pcs Accessories Cover Plug M-96x96CPS x 24 pcs Cover Plug with Hook M-96x96H x 2 pcs Cover Plug Remover x 1 pc ZERO POINT QUICK CHANGE DEVICES / CLAMPING BRIDGES / TWIN CLAMPING BRIDGES (COMBO) © 2026 COPYRIGHT. HOMGE MACHINERY IND. CO., LTD.

Open the catalog to page 4