Group: HOMAG Group
Catalog excerpts
One of your most important, and at the same time most expensive, resources is your personnel. Therefore, you will want to deploy each employee as efficiently as possible. HOLZMA handling systems help you in doing so. We offer intelligent processes that allow you to feed the saw on time, to transport sensitive material gently and later destack everything in an orderly manner - or to send it straight on to the next processing station. Our aim is to eliminate idle time throughout your entire production process. This allows you to save time, reduce unit costs and, on top of that, you can deploy...
Open the catalog to page 2HOLZMA offers a variety of solutions for feeding the machine from the rear. These include, for example, push-feed systems, combinations of push-feed and vacuum-feed systems and purely vacuum-feed systems. In addition, the Econolift assists you in feeding the saw from the front. Furthermore, HOLZMA also designs larger, custom handling systems, complete with intelligent storage concepts, if desired. Here, HOLZMA works closely with sister company HOMAG Automation.
Open the catalog to page 3Feed systems Around the lifting table Feeding: solutions around the lifting table Feeding via the lifting table is possible for HOLZMA single saws (HPL) and angular systems (HKL). For non-sensitive panel material, we recommend a classic push-feed system, which allows you to transport big books of panels quickly, efficiently and fully automatically to the rear machine table. HOLZMA has special solutions to offer for thin, corrugated or sensitive panels. The many HOLZMA feeding components allow you to design a saw that will fully meet your specific requirements. Your benefits • You save time...
Open the catalog to page 4Feed systems Around the lifting table Feeding: solutions around the lifting table Separate feed carriage (not illustrated) The separate feed carriage feeds the saw while the program fence is still up front at the saw, dealing with the current job. That saves a great deal of time. 1 3 Abbildung zeigt Prinzip Crosswise protection board outfeed Video available Video available Illustration shows the principle Micro-feed and hold-back device for thin panels The micro-feed option allows thin panels upwards of 6 mm thickness to be pushed onto the rear machine table (provided that the material...
Open the catalog to page 5Feed systems Feeding with vacuum technology Feeding with vacuum technology Vacuum feeding is the number one choice for sensitive panels. In contrast to push-feed systems, it deposits the panels singly, and so extremely gently, on the rear machine table. This ensures that you are ideally set up for a growing diversity of materials. Illustration shows optional equipment Feed gantry TBP 211 The TBP 211 feed gantry from HOMAG Automation is designed to increase efficiency and flexibility in the cutting process. It feeds panel saws automatically and quickly, with maximum care of material. Layouts...
Open the catalog to page 6Feed systems Saw-storage combinations Feeding: saw-storage combinations Small, medium or large – we have the right saw-storage combination for everyone. The systems installed by HOLZMA are as varied as the companies in which the storage systems are used. Let HOLZMA's specialists advise you as to which solution is best for your company. Saw and storage system: an unbeatable team • The software allows you to set up instructions for handling each type of panel for every storage position and panel identification number (vacuum settings) • The storage software indicates the different storage...
Open the catalog to page 7Feed systems Saw-storage combinations Efficiency boost with panel labeling system and feed-stacking table (optionally with integrated feed) • Ensures smooth production without interruptions • Turns dead time into value-adding time • Optimizes handling during destacking, because all the parts are already labeled • Saves time, space and money by improving efficiency • Can be retrofitted • Plug & Play: easy add-on • Perfectly matched to the saw (height, width, roller rails) • Virtually no more idle time • Without alignment Panel labeling system The innovation for saws with storage linkup: the...
Open the catalog to page 8Feed systems Econolift Feeding from the front: Econolift The Econolift assists in feeding the saw from the front. It allows books of panels to be transported effortlessly onto the air cushion tables. This is efficient and at the same time ergonomic. Automatic panel feeding – directly onto the air cushion tables The Econolift allows single panels or books to be automatically pushed directly onto the air cushion tables of the saw. The Econolift comprises: • four-column lifting table with longitudia nal roller conveyor (not driven) | 1 • utomatic panel feed by micro-feed | 2 a • n additional...
Open the catalog to page 9Handling solutions within the saw Between feeding and destacking: convincing handling solutions within the saw An intelligent overall process is essential for good work results. That is why HOLZMA not only attaches great importance to good feeding and destacking solutions but also continually develops innovations for transport within the saw. We are going to present some of these concepts here. Power Concept Solutions for scratch-sensitive surfaces Solutions for pressure-sensitive material Turning device for headcuts HOLZMA Die Baureihe 5 Handling Manual pressure control Central side...
Open the catalog to page 10Handling solutions within the saw Further options Between feeding and destacking tailored handling solutions HOLZMA has numerous other handling solutions. We are going to present a selection here. Ask your HOLZMA sales consultant - he will find the right concept to meet your challenges. NEW! Power Concept PRACTIVE The low-cost version of the successful Power Concept PROFESSIONAL - developed for the HPP 300 profiLine with feeding from the front and for saws with simple storage link-up without an integrated feed-stacking table. Power Concept PRACTIVE can do everything that constitutes Power...
Open the catalog to page 11Handling solutions within the saw Pressure-sensitive material Everything under control – for pressure-sensitive material Pressure-sensitive material is playing an increasingly important role in panel processing. With your HOLZMA saw you are well prepared for this trend – thanks to innovative optional features. Technology that pays off. Program-activated clamps This option ensures panel edges are not damaged. Now also possible: automatic clamp activation in “measuring” mode. Lightweight/honeycomb boards Rigid plastic foam boards These foamed boards are used for the most part as insulation...
Open the catalog to page 12All HOMAG Group catalogs and technical brochures
-
EDGETEQ S-200 | S-300
56 Pages
-
B-520/540BEAMTEQ B-560/660
17 Pages
-
CENTATEQ N-500
24 Pages
-
HPS 320 flexTec
8 Pages
-
SAWTEQ B-300 multiTec
11 Pages
-
The 6 series: HKL 600
15 Pages
-
SAWTEQ B-400
31 Pages
-
SAWTEQ B-300
31 Pages
-
SAWTEQ B-200
19 Pages
-
SAWTEQ B-130
15 Pages
-
Panel dividing saw SAWTEQ B-130
15 Pages
Archived catalogs
-
K 320
24 Pages
-
Batch size 1
8 Pages
-
Throughfeed saws
20 Pages
-
airTec
2 Pages
-
reacTec
8 Pages
-
FSL 310, 320, 330
20 Pages
-
FKF 200
2 Pages
-
K 600 Edge Banding Machines
40 Pages
-
FPL_614-624
12 Pages
-
14513
14 Pages
-
Edge banding machines K 520
32 Pages
-
Edge banding machines KAL 300
28 Pages
-
Processing centre Venture 12
8 Pages
-
HOMAG Transport Systems
12 Pages
-
Processing centres BMG 500/600
36 Pages
-
Double-end tenoner FPL 220
2 Pages
-
Postforming VFL 310
2 Pages
-
LeanFactory
8 Pages
-
2200 edge banding machines
26 Pages
-
K 600 Edge Banding Machines
40 Pages
-
Processing Centers B200/300
28 Pages