UF2000-F In-line Ultrasonic Flow Meter Product Introduction UF-2000F series in-line ultrasonic flow meter/heat meter is a new product launched in accordance with the JJG1030-2007 ultrasonic flow meter verification regulations in order to improve the reliability of product protection. The product uses the principle of ultrasonic time difference, suitable for DN15~DN6000 pipeline flow measurement. This series feature high measurement accuracy, strong anti-interference ability, high stability and reliability, and rich interfaces. Each component of the flow meter is designed in accordance with the...

Product Features Model Types 1. Reflection type in-line ultrasonic flow meter (DN15-32) Suitable for DN15~DN32mm. The connections include threaded connection and flange connection, and the protection level is IP68. Measuring fluid temperature: -30~160℃, pressure: 0~4.0Mpa, accuracy can reach ±0.5%. ● Threaded connection

Valid length of thread Connecting thread Flange dimension external Center circle Bolt hole 2. Standard in-line ultrasonic flow meter (DN40-6000) Standard in-line ultrasonic flow meter is suitable for DN40~DN6000mm,IP68, Measuring fluid temperature: -30~160℃, pressure: 0~2.50Mpa, accuracy ±0.5%.

Flange dimension External bolt hole Bolt Spec 3. In-line Ultrasonic flow meter/heatmeter It’s equipped with a three-wire temperature sensor to achieve he

Specification Spec Flow meter:±0.5%; heatmeter, ±1.0% 1 channel 4~20mA currency output, impedance 0~1K, accuracy 0.1% Signal output 1 channel OCT pulse output (pulse width 6~1000ms, 200ms by default) 1 channel relay output 3 channel 4~20mA currency input, accuracy 0.1%; temperature, Signal input pressure and liquid level signals can be collected. 3 wire PT100 can be connected to measure heat Data port Special cable Generally less than 50m; for 485 communication, transmission distance can be more than 1000 meter. Pipe material Steel, S/S, iron steel, copper, PVC, aluminum, etc, liner allowed Pipe...