*mydirectindustry

HRF-600S

Product catalog summary

Overview
The HRF-600S Series Radar Wave Flow Meter is designed for non-contact measurement of flow rates in various environments. It utilizes radar technology to measure water velocity and level, unaffected by environmental factors such as wind, temperature, and sediment. The device supports solar or battery power, making it suitable for remote locations.

Key Features

Non-contact measurement with rainproof mode.
Outputs data on velocity, water level, and flow rate.
Low power consumption with solar or battery power options.
Compatible with multiple cross-section shapes (trapezoid, round, U-shaped).
Configurable software for adapting to different conditions.

Product Profile
The HRF-600S is a compact radar flowmeter for monitoring open channels and underground pipe networks. It uses 24GHz and 60GHz microwaves for velocity and water level measurement, respectively. The device is designed for low power consumption, ideal for solar-powered applications.

Applications

Open channels, irrigation canals, and underground pipe networks.
Urban water supply and sewage outlet monitoring.
Flow calculation and monitoring of water inlet and drainage.

Specifications

Operating temperature: -30 to 80°C.
Operating voltage: 7-32VDC; 5.5-32VDC (optional).
Working current: ≤28mA (operating), ≤1mA (standby).
IP Rating: IP68.
Radar frequency: 24GHz for velocity, 60GHz for water level.
Max measuring range: 40m for velocity, 0.2-7m for water level.
Data transmission: RS485/RS232, 433MHz (optional), NB-IoT (optional).

Versions

HRF-600s: Standard version.
HRF-600s-R: RTU version with Bluetooth support and remote upgrade capabilities.

Catalog excerpts

HRF-600S Series Radar Wave Flow Meter Product Profile HRF-600S is a small radar flowmeter dedicated to flow monitoring of open channels in irrigation areas and underground pipe networks. The water velocity and water level are measured by microwave technology, and flow and cumulative flow at cross-sections are converted according to the built-in software model and algorithm. 24GHz and 60GHz microwaves are used to measure velocity and water level respectively. The measurement is not affected by ambient temperature, air pressure, water vapor on water surface, water pollutants and sediments. It features...

Open the catalog to page 2

Applications 1. Velocity/ water level/flow measurement of open channels, irrigation canals, underground pipe networks, etc. 2. Auxiliary water treatment, such as urban water supply, sewage outlet monitoring, etc. 3. Flow calculation, water inlet and drainage flow monitoring, etc.

Open the catalog to page 3

Specifications Item Versions HRF-600s/HRF-600s-R HRF-600s(Stanard version) HRF-600s-R(RTU version): Support parameter adjustment by bluetooth; wireless configuration and maintenance by mobile phone; equipment remote upgrade Velocity Measurement System Measuring Principle Planar microstrip array antenna Operating Mode Manual, automatic, telemetry Applicable environment Operating temperature Operating Voltage Working current For 12VDC input, operating mode: ≤28mA Standby mode:≤1mA Light protection Radar Wave Velocity Meter Radar power Radar frequency Velocity range Velocity measurement accuracy...

Open the catalog to page 4

HRF-600S

HRF-600S

Catalog excerpts

All Holykell catalogs and technical brochures

Archived catalogs