Standard shield 7000 series is an economical HF (High Frequency) EMI shielding gasket which can be supplied in a wide range of dimensions. It is very effective in combination with stainless steel, copper and chrome-plated constructions. Our 7000 series standard shield EMI gaskets can be provided with a conductive or a non-conductive self-adhesive strip on the back for easy assembly. Standard shield consists of a foam core covered with highly electrically conductive textile. For smaller widths than 3mm we suggest to use the conductive adhesive (code 03). This guarantees excellent EMI / RFI shielding performance. Please note: For special applications, different foam cores, conductive foils and fabrics are available on request. SHIELDING PERFORMANCE* Soft EMI/RFI shielding gasket for panels, doors and lids. Economical High frequency shielding gasket (HF shielding gasket) solution. • Self-adhesive EMC gasket • Easy to fit, can be cut with scissors • Gasket can be die-cut (screw-holes, bites for easy bending etc...) • Roll length of 1 until 1000 meters (Depending on width and height of the EMI gasket) • High EMI/RFI shielding performance • Low closure force • EXTREMELY STRONG • Deflection 50% • CNC cut into specific lengths • Can be made into any shape or as a frame (according CAD drawing) • Combination with water seal • UL94V-0 flame retardant foam core (foam code F) • Chemical resistant rubbers like EPDM • Silicone sponge for high temperatures up to 220 °C • Different conductive foils and fabrics • With cut-outs so that the gasket can be easily bend TAPE SPECIFICATION • 01 Standard self-adhesive placed in the middle • 02 Without self-adhesive • 03 With conductive self-adhesive (only recommended on small sizes) • 06 Standard self-adhesive, asymmetrical • 07 Standard self-adhesive placed on the side FOAM SPECIFICATION Standard Neoprene Foam EPDM foam core Low closure force PVC Foam,

» STANDARD SHIELD 7000 AVAILABLE SIZES Width X (mm) 2 Other dimensions on request. SPECIAL PROFILE SHAPES EPDM rubber MECHANICAL PROPERTIES ORDER EXAMPLE Series Tape code Foam code 01 : Standard self-adhesive placed in the middle 02 : Without self-adhesive 03 : With conductive self-adhesive (only recommended on small sizes) 06 : Standard self-adhesive, asymmetrical 07 : Standard self-adhesive placed on the side N : Standard neoprene foam E : EPDM foam core P : Low closure force PVC foam, slow recovery F : Flame retardant UL94V-0 foam Length (meters) Jacobus Lipsweg 124, NL-3316 BP Dordrecht,...