Clip-on gasket Catalog
14Pages

Clip-on gasket 6500 series Holland Shielding Systems BV

Conductive exible edge protector Sealing section Conductive edge protector Dynamic section 2 Holland Shielding Systems - P.O. box 730 - NL-3300 AS Dordrecht - The Netherlands - TEL +(31) 78-6131366 - FAX +(31) 78-6149585 - info@hollandshielding.com - www.hollandshielding.com

Clip-on gaskets 65OO Introduction This newly developed clip-on gasket programme is extremely easy to mount and provides a solid mechanical attachment of the EMI shielding gasket. The gaskets can be assembled without the need of tools, simply by pressing the section by hand onto the metal ange of your enclosure without the use of any adhesive’s. The clamp mounted feature results in superb shielding performance, no degradation of shielding effect overtime and tremendous cost savings on production lines. The clip-on range comes in three avors: • Type W series (Clip-on shielding gasket with...

Clip-on gaskets 65OO Available types Type W (Clip-on shielding gasket with water seal) The type W clip-on gasket series has been specially designed to provide environmental (water) sealing as well as EMI shielding for outdoor electronics and telecom cabinet manufacturers. The conductive textile is half wrapped around the gasket, dividing the gasket in two parts, a part for electrical conductance / EMI shielding (made of highly conductive textile), and a part for water sealing. The half wrapped conductive textile provides over 96dB of broadband noise attenuation that is crucial for mid to...

Clip-on gaskets 65OO Conductive exible edge protector 9 Partnumber 6502 F, H Available type Clamping range 1 - 2 mm PVC Material Conductive exible edge protector Partnumber 6506 F, H Available type Clamping range 1 - 3 mm PVC Material The gasket is designed to slide easily over metal anges to help reduce installation costs and is a good choice for retrot applications. Partnumber 6503 Available type F, H Clamping range 1 - 3 mm PVC Material • Connecting plates • ESD (static discharge) • EMI shielding Partnumber 6507 Available type F, H Clamping range 1 - 4 mm Material PVC • Easy gasket...

Clip-on gaskets 65OO Conductive exible edge protector 9,3 7 Partnumber 6510 F, H Available type Clamping range 9 - 12 mm PVC Material Partnumber 6514 F, H Available type Clamping range 1 - 3 mm PVC Material Partnumber 6511 Available type F, H Clamping range 1 - 4 mm Material PVC Ordering information Partnumber 6512 F, H Available type Clamping range 18 - 20 mm PVC Material When you want to order a conductive exible edge protector please specify the following Please specify the type from the tables W : water seal F : fully wrapped H : heavy duty Partnumber 6513 Available type F, H Clamping...

Clip-on gaskets 65OO Technical datasheet Technical datasheet Sealing section 19,4 Partnumber 6523 W, F, H Available type Clamping range 1 - 4 mm PVC Material • High performance solutiovvn • Very cost efcient solution This combination of materials decreases the number of gaskets needed per cabinet. This makes the sealing section a economic solution for application where an environmental seal as well as EMI shielding is needed. Partnumber 6527 W, F, H Available type Clamping range 1 - 4 mm PVC Material Sealing section Partnumber 6524 Available type W, F, H Clamping range 1 - 2 mm Material PVC...

Clip-on gaskets 65OO Technical datasheet Sealing section 14 Partnumber 6531 Available type W, F, H Clamping range 2 - 4 mm Material PVC Partnumber 6534 Available type F, H Clamping range 2 - 4 mm Material PVC Partnumber 6537 Available type W, F, H Clamping range 1 - 3 mm Material PVC Partnumber 6532 W, F, H Available type Clamping range 2 - 4 mm PVC Material Partnumber 6535 W, F, H Available type Clamping range 1 - 4 mm PVC Material Partnumber 6538 W, F, H Available type Clamping range 1 - 4 mm PVC Material Partnumber 6533 Available type F, H Clamping range 2 - 4 mm Material PVC Partnumber...

Technical datasheet Conductive edge protector 8,6 Partnumber 6542 F, H Available type Clamping range 1,2 - 1,8 mm EPDM, 70 ± 5 shore A Material Conductive edge protector This is a very rigid prole, used to protect sharp edges from damaging and still preserve the electrical conductance. This type is also suitable for connecting two steel plates or for static discharge. 2 Partnumber 6543 Available type F, H Clamping range 1,2 - 1,8 mm Material EPDM, 60 ± 5 shore A 2,3 Partnumber 6540 Available type F, H Clamping range 0,5 - 2 mm Material EPDM, 70 ± 5 shore A Ordering information Partnumber...

Technical datasheet Dynamic section Partnumber 6552 Available type F, H Clamping range 1 - 3 mm Material EPDM, 60 ± 5 shore Partnumber 6556 Available type F, H Clamping range 1 - 3 mm Material EPDM, 60 ± 5 shore Dynamic section Simple clip-on installation for doorjambs and similar needs, edge mounts, low and high deection. For applications where a small dynamic range is required and a clip-on mounthing is preferred. Mounts simply bij pressing into position. Partnumber 6553 Available type F, H Clamping range 1 - 3 mm Material EPDM, 60 ± 5 shore Partnumber 6557 Available type F, H Clamping...

Clip-on gaskets 65OO Technical datasheet Dynamic section 26 10,5 Partnumber 6563 F, H Available type Clamping range 1 - 4 mm EPDM, 60 ± 5 shore A Material Partnumber 6567 Available type F, H Clamping range 1 - 3 mm Material EPDM, 60 ± 5 shore A Partnumber 6560 Available type F, H Clamping range 1 - 3 mm Material EPDM, 60 ± 5 shore A Partnumber 6564 F, H Available type Clamping range 1 - 3 mm EPDM, 60 ± 5 shore A Material Partnumber 6568 Available type W, F, H Clamping range 3 - 5 mm Material EPDM, 60 ± 5 shore A Partnumber 6561 W, F, H Available type Clamping range 1 - 3 mm EPDM, 60 ± 5...

Clip-on gaskets 65OO Technical datasheet Dynamic section 15,6 Partnumber 6571 F, H Available type Clamping range 2,5 - 3,5 mm EPDM, 60 ± 5 shore A Material Partnumber 6575 F, H Available type Clamping range 2 - 4 mm EPDM, 70 ± 5 shore A Material Partnumber 6576 Available type F, H Clamping range 2 - 4 mm Material EPDM, 60 ± 5 shore A Partnumber 6572 F, H Available type Clamping range 1,5 - 3 mm EPDM, 60 ± 5 shore A Material Partnumber 6579 Available type W, F, H Clamping range 1 - 3 mm Material EPDM, 70 ± 5 shore A Partnumber 6573 Available type F, H Clamping range 2 - 3 mm Material EPDM,...