1. Catalogs
  2. Hoist UK
  3. EUROLIFT BH

EUROLIFT BH
1 /8Pages

EUROLIFT BH

EUROLIFT BH
1 /8Pages

Catalog excerpts

EUROLIFT BH-1

MORE THAN 150 YEARS OF EXPERIENCE OF HANDLING WITH HOOKS EUROLIFT BH Electric belt hoist for load from 500 up to 5,000 kg

 Open the catalog to page 1
EUROLIFT BH-2

The leading French manufacturer of lifting equipment VERLINDE is the leading French manufacturer of hoisting equipment, capable of mass producing belt, cable and chain hoists, winches, jib cranes and bridge crane components, at its VERNOUILLET plant. From CAD/CAM design to execution, manufactured with amongst the most up-to-date machining facilities in any plant in Europe and backed by the skill and know-how of our experienced personnel, each hoist bearing the VERLINDE logo is a warrant for the user of both reliability and quality. New products, news concepts Attuned to the needs of its customers,...

 Open the catalog to page 2
EUROLIFT BH-3

Customised installations > ixed version. F These hoists do not have a trolley and are designed for applications where no horizontal travel is needed. Maximum capacity: 5,000 kg. > onorail short headroom hand-push M travel trolley (HPR). These hoists feature a trolley (for horizontal movement of the load) with a design enabling loads of up to 5,000 kg to be moved with optimised hoisting height. > onorail powered boggey trolley M for curved beams. These hoists feature a trolley (for horizontal movement of the load) with a design enabling loads of up to 2,000 kg to be moved horizontaly on curved...

 Open the catalog to page 3
EUROLIFT BH-4

EUROLIFT BH Electric belt hoist for load from 500 up to 5,000 kg Gear box 3 steps helical gear, life-lubricated (semi-fluid grease), comprising O-ring seals and lip seal at shaft end (BH2). Lifting motor 2-speed motor, electromagnetic brake featuring automatic wear compensation. IP 55 protection. Class F insulation. Overload limiter The hoist has a load limiter as standard equipment, preventing hoisting in the event of overloads (in compliance with the European “MACHINES” Directive). savings Lifting motor. High operating factor ensuring longer service life. Hook block. Small “C” dimensions and...

 Open the catalog to page 4
EUROLIFT BH-5

Lifting belt Flame-retardant with good dimensional stability and excellent ability to maintain its strength after immersion inboiling water. Excellent ability to withstand attack by acids. Immune to attack by solvents. Rot-proof. BH5: Dynema belt (this belt has the same characteristics as those of the BH2, with a greater safety factor). Hook block Possibility of stainless steel hook block and hook. Travelling. 2 traveling speeds (20/5 m/min. 10 2,5 m/min and Bh2) for more accurate positioning of your loads. Belt. Excellent ability to withstand attack by acids, immune to solvents, rot-proof and...

 Open the catalog to page 5
EUROLIFT BH-6

The EUROLIFT BH can be equipped with a great many options and can be specifi cally adapted for special purpose uses: > Non standard beam section width. > Higher travelling speeds. > Time counter. > EUROMOTE type infrared or radio remote-control. > Travelling movement limit switch. > Tropicalised travelling movement and lifting motors. > Trolley mounted on bogies. > Special power supply voltage. > Load limiter with 2 or 3 steps. > Total anti-corrosion protection*. > Stainless steel hook and hook block**. > Covering roof for protection against rain. > Horn controlled from push button box. > Explosion-proof...

 Open the catalog to page 6
EUROLIFT BH-7

Eurolift type Number of falls Standard Stainless steel BH2 Height Number of lift of falls (m) Lifting speed (m/min) Travelling trolley Eurolift type Push Chain drive Motorized trolley trolley 1 speed trolley ► : available in this version X : not available in this version ^ Explanation of EUROLIFT BH codification* BH2 02 R3 Hoist body type Hoist gear box type

 Open the catalog to page 7
EUROLIFT BH-8

VERLINDE is : > he leading French manufacturer and T exporter of lifting and handling equipment. > A comprehensive range of 30 groups of lifting equipment from 60 to 250,000 kg. > ISO 9001 Quality control certified and ISO 14001 Environmental Management Systems. Our references Metallurgy, Mechanics, Nuclear Chemicals, Petrochemicals industry Aeronautical industry Arcelor Mittal - Unimetal - Stein - NFM - Framatome - Alstom Sanofi Aventis - Du Pont De Nemours - Total Aérospatiale - Airbus - Eurocopter - Air France - Aéroport de Paris - Snecma - Dassault Aviation Agri-food industry Automobile industry...

 Open the catalog to page 8

All Hoist UK catalogs and technical brochures

  1. DIGICHAIN®

    3  Pages

  2. EUROSTYLE®

    4  Pages

  3. GANTRIES

    4  Pages

  4. WINCHES

    16  Pages

  5. EUROBLOC VM

    6  Pages

  6. EUROBLOC VT

    12  Pages

  7. EUROCHAIN VR

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.