HFM5B Plate heat Exchanger
2Pages

{{requestButtons}}

Catalog excerpts

HFM5B Plate heat Exchanger - 1

Flow plates: The plate design has two corrugated forms: horizontal corrugated and vertical corrugated. The plates can meet different pressure drop requirements and suit for different working conditions media. The corrugated “herringbone” pattern makes more contact points between plates bearing more uniform pressure and ensures turbulent flow in the whole effective area. Data Required for Correct Quotation ■ Types of Media ■ Working Pressure ■ Pressure Loss ■ Thermodynamic properties ■ Temperatures ■ Flow rates Above data determines the choice of heat exchanger. Recommended Applications: The plate heat exchangers of the HFM5B series are designed for high pressure. They can be used for heating and cooling operations in multiple areas, steam condensation, milk pasteurization, industrial circulating water cooling and other clear media's heating and cooling. HFM5B plate heat exchanger's muti-section design for milk pasteurization has the advantages in less space taking, more efficient heat transfer, and economic cost control. Design Priciple: HFM5B plate range with length 0.43m, will cover many duties up to 9m3/h in a single pass solution, satisfying many applications requirement. By means of countercurrent flow, the hot side medium transfers thermal to the cold side medium through plates between channels. And the media do not mix with each other to achieve optimal heat exchange efficiency. For the one pass solution design, all connections are on the fixed frame side which will easier the plate heat exchanger installation and disassembling. When do cleaning and maintenance jobs, no need to remove the pipes. Hofmann (Beijing) Engineering Technology Co., Ltd. Tel.+86 10 8447 8229 service@hfm-phe.com www.hfm-phe.com

Open the catalog to page 1
HFM5B Plate heat Exchanger - 2

Technical Information Frame: ■ Painted frame, colour RAL colours) ■ Stainless steel frame, designed for the food and dairy industry. Both frames comes with clamping bolts placed around the frame edge. Connections: ■ DN25 weld neck flange, carbon steel /stainless steel/ Titanium ■ DN25 pipe/ threaded pipe carbon steel/ stainless steel/ Titanium Other connections available on request. Plates: Material: AISI304, AISI316, 254SMO, C276, Titanium Other materials available on request. Gaskets: The unique non-glued gasket which packs the plates together easily with cliped-on...

Open the catalog to page 2

All Hofmann (Beijing) Engineering Technology Co. catalogs and technical brochures