HFM45B Plate heat Exchanger
2Pages

HFM45B Plate heat Exchanger Recommended Applications: HFM45B plate heat exchanger is designed in wide gap type for medium high pressure. It is suitable for cooling and heating applications of products containing granules or viscous products, for example sugars, high concentration dairy products, paper and other high viscosity media. Flow plates: The plate thickness of N40 is 0.8mm, can be applied in higher pressure operation conditions. A corrugation depth of more than 0.4mm is more conducive to the operation of media containing suspended particles, and better heat transfer effect obtained. In addition, the entrance area is designed for optimal turbulence flow, which can achieve high thermal efficiency and thus in the design solution with less heat transfer flow plates. Data Required for Correct Quotation ■ Types of Media ■ Working Pressure ■ Pressure Loss ■ Thermodynamic properties ■ Temperatures ■ Flow rates Above data determines the choice of heat exchanger. Design Priciple: HFM45B is wide gap type, plate range with length 1.4m, will reach up to Max. 200m3/h in a single pass solution. The plate design has a deeper corrugation and a wider fluid flow path to prevent slurry and effluent from blocking the flow path. By means of countercurrent flow, the hot side medium transfers thermal to the cold side medium through plates between channels. And the media do not mix with each other to achieve optimal heat exchange efficiency. For the one pass solution design, all connections are on the fixed frame side which will easier the plate heat exchanger installation and disassembling. When do cleaning and maintenance jobs, no need to remove the pipes. Hofmann (Beijing) Engineering Technology Co., Ltd. Tel. +86 10 8447 8229 service@hfm-phe.com www.hfm-phe.com

Technical Information Frame: ■ Painted frame, colour RAL colours) ■ Stainless steel frame, designed for the food and dairy industry. Both frames comes with clamping bolts placed around the frame edge. Connections: ■ DN100 carbon steel flange, rubber insert, AISI304/ AISI316/ Titanium metal insert ■ DN125 carbon steel flange Other connections available on request. Plates: Material: AISI304, AISI316, 254SMO, C276, Titanium Other materials available on request. Gaskets: the unique nonglued gasket which locks the plates together easily with strong rubber buttons, so that...