Smooth Flow
28Pages

Smooth Flow™ TUBING & FITTINGS SPECIFICATIONS

Tubing Our standard catalog items include tube sizes from 2-1/8" through 14" OD in Carbon, Stainless, Aluminum and Galvanized Steel. 1-1/2" and 2" OD are available upon request. Tube Dimensions Standard Elbows & Bends Catalog Part Variations If our standard items don’t meet your specific needs, contact us to request a quote. Custom tube fabrications are available to meet your exact specifications. Fast delivery is available on a wide selection of in-stock Tubing, Bends, Couplings, Fittings and Installation Components. We’ll also make every effort to meet emergency requirements for non-stock...

Tubing When Ordering, Please Specify Type of Material: Standard Tubing • 2-1/8" through 14" OD • Wall Thickness: 16, 14, 12, 11 Gauge • Materials: Carbon, Stainless, Aluminum, Galvanized Steel Carbon Aluminum Stainless Galvanized Steel Nominal wall Thickness (In.) Galvanized Steel • Our standard stock (unless noted) is 20 ft. lengths, but we will cut to your specifications * 10 ft. lengths ** Quotation Basis † 13 GAUGE Key OD = Outside Diameter GALV = Galvanized WT = Welded Tubing ST = Seamless Tubing All reference

Standard Elbows & Bends When Ordering, Please Specify Type of Material: Standard Specifications • Inventories include a wide range of parts: - Standard Elbows (2-1/2” times OD) Carbon Aluminum Stainless Galvanized Steel - Short Radius Elbows (1-1/2” times OD) - Long Radius Bends (over 2-1/2” times OD) • Smooth, wrinkle free elbows • Wall Thicknesses: 16, 14, 12, (11 Gauge Available in Straight Ends Only) • (2-1/8” to 4” OD = 16 Gauge) (5” to 8” OD = 14 Gauge) (10” to 14” OD = 12 Gauge) • Materials: Carbon, Stainless, Aluminum, Galvanized Steel Tube Bending Capabilities OD (IN.) Center Line...

When Ordering, Please Specify Type of Material: Standard Elbows & Bends Standard Radius Elbows • 30° and 60° elbows available • 11 gauge elbows available (straight ends only) Carbon Aluminum Stainless Galvanized Steel • Expanded ends standard through 6" size • Expanded one end available • Straight ends available on all sizes by request (add “S” to the end of part no.) • 8" size and larger only available with straight ends A (OD) (In.) B (CLR) (In.) 90° Standard Radius Elbow 45° Standard Radius Elbow NOTE: Add -C, -S, -A or -Z to the end of Part No. to indicate material (e.g., SFEL-211-Z =...

Standard Elbows & Bends When Ordering, Please Specify Type of Material: Standard Long Radius Bends • Expanded ends not available on 8" and 10" bends and all 11 gauge bends. They are available on all other sizes on a special order basis only. Please contact Customer Service for a quote. Carbon Aluminum Stainless Galvanized Steel OD = Outside Diameter CLR = Center Line Radius C = Center to end All reference dimensions are nominal. NOTE: Add -C, -S, -A or -Z to the end of Part No. to indicate material (e.g., SFEL-211-Z = Zinc, SFEL-211-ZS = Zinc/Straight end) • Nominal standard tangent is two...

When Ordering, Please Specify Type of Material: • 2-1/8" through 14" OD • Wall Thickness: 16, 14, 12, (11 Gauge Available in Straight Ends Only) Carbon Aluminum Stainless Galvanized Steel (• 16 Gauge: 2-1/8" to 4" OD) (14 Gauge: 5" to 8" OD) (12 Gauge: 10" to 14" OD) • Materials: Carbon, Stainless, Aluminum, Galvanized Steel • • • • • 11 Gauge TY’s Available (straight ends only) Expanded ends standard through 6" size Straight and Expanded combinations available Straight ends available on all sizes by request (add "S" to the end of part no.) 8" size and larger only available with straight...

When Ordering, Please Specify Type of Material: Standard 90° TY’s (cont.) • 11 Gauge TY’s Available (Straight ends only) Carbon Aluminum Stainless Galvanized Steel • Expanded ends standard through 6" size • Straight and Expanded combinations available • Straight ends available on all sizes by request (add "S" to the end of part No.) • 8" size and larger only available with straight ends Size (In) • 10" od stainless branches only are segmented • All 12" and larger OD branches are segmented Key OD = Outside Diameter F = Outside Diameter (OD) = G Inside Diameter (ID) (expanded end) L =...

When Ordering, Please Specify Type of Material: Carbon Aluminum Stainless Galvanized Steel • Wall Thickness: 16, 14, 12, (11 Gauge Available in Straight Ends Only) • (16 Gauge: 2-1/8" to 4" OD) (14 Gauge: 5" to 8" OD) (12 Gauge: 10" to 14" OD) • Materials: Carbon, Stainless, Aluminum, Galvanized Steel • • • • • 11 Gauge YL’s Available (straight ends only) Expanded ends standard through 6" size Straight and Expanded combinations available Straight ends available on all sizes by request (add "S" to the part No.) 8" size and larger only available with straight ends Size (In) OD = Outside...

When Ordering, Please Specify Type of Material: Standard 45° YL’s (cont.) • 11 Gauge YL’s Available (straight ends only) Carbon Aluminum Stainless Galvanized Steel • Expanded ends standard through 6" size • Straight and Expanded combinations available • Straight ends available on all sizes by request (add "S" to the part No.) • 8" size and larger only available with straight ends Size (In) • 10" od stainless branches only are segmented • All 12" and larger OD branches are segmented Key OD = Outside Diameter D = Expansion Depth 1-3/8” through 4” OD, 1-5/8” for 5” and 6” OD A = Outside...

When Ordering, Please Specify Type of Material: Fittings STANDARD DOUBLE Y'S Carbon Aluminum Stainless Galvanized Steel • 2-1/8" through 14" OD • Wall Thickness: 16, 14, 12, (11 Gauge Available in Straight Ends Only) • (16 Gauge: 2-1/8" to 4" OD) (14 Gauge: 5" to 8" OD) (12 Gauge: 10" to 14" OD) • Materials: Carbon, Stainless, Aluminum, Galvanized Steel • • • • • NOTE: Add -C, -S, -A or -Z to the end of Part No. to indicate material (e.g., SFEL-211-Z = Zinc, SFEL-211-ZS = Zinc/Straight end NOTE: All standard Double Y's are special order and non-returnable. Key OD = Outside Diameter D =...