*mydirectindustry

Wingnut

Product catalog summary

Flow Range: The document specifies standard flow ranges for turbine flowmeters, with the option for custom ranges upon request from Hoffer Flow Controls Engineering.

Bearing Types: Two types of bearings are mentioned: Hybrid ceramic bearings (—CB) suitable for CO2 and H2O but not for Cement/Sand Slurry, and Tungsten Carbide sleeve bearings (—T) suitable for H2O and CS but not for Liquid CO2.

Pickup Coils: Various magnetic pickup coils are available, including standard, intrinsically safe, and Redi-Pulse options, each with specific configurations and safety certifications.

Enclosures: Options include a standard 3/0 enclosure and a 3/0 enclosure with a dome cover for specific signal conditioners.

Special Features: The CE mark is required for European compliance.

Calibration: Flowmeters are supplied with a 10-point calibration and a 'K' factor tag.

Flowmeter Life: Limited in Cement/Sand Slurry applications, with a requirement for specifying maximum particulate size.

Technical Specifications: The document provides detailed specifications for various models, including linear flow range, bearing types, pickup coil options, and construction materials. Linearity is ±0.5% of reading, with repeatability of ±0.1%. The temperature range is from -450° to +450°F, and the construction includes high chrome alloy steel housing and stainless steel internals.

General Information: The document notes that specifications are subject to change and advises verification with the manufacturer. The quality system is certified to ISO 9001 standards.

Catalog excerpts

The Turbine Flowmeter Company ^^^^^^^^= TECHNICAL DATA SHEET Wing Nut High Pressure (15,000 PSI) Turbine Flowmeters lor Liquid Service

Open the catalog to page 1

GENERAL SPECIFICATIONS: Linearity: ±0.5% of reading (±0.25% typical) over tabulated linear flow range. Repeatability: ±0.1% over tabulated useable range. Temperature Range:-450° to +450°F (Standard). Pressure Drop Characteristics: Request graphical data. Overrange: 150% of maximum flow (intermittently). Construction: Housing - 4130 high chrome alloy steel. Internals - All stainless steel (except “T” bearings). Wing Nut Calibrated Spare Internal Kits Flowmeter Size (Refer Note 1) Linear Flow Range (US GPM) (Inches) (Refer Note 2) Bearing Type Service Types Min. Max. HO1 -4 -8.4 -60 -84 -CB -T...

Open the catalog to page 2

All Hoffer Flow Controls catalogs and technical brochures

CAT2
2 Pages
The Hoffer Collection
8 Pages
hogas
2 Pages
premgas
4 Pages
Hoffer Engineering Guide for Liquids
8 Pages
cat1
2 Pages
sy14b
2 Pages
World?s First Full Capacity 4? WECO 1502 Flow Meter
2 Pages
Subsea flow measurement
2 Pages
HIT 2A
48 Pages
Batch controller
4 Pages
Nova flow
4 Pages
ACEII
72 Pages
ICE
4 Pages
Teflon series
2 Pages
HHP series
6 Pages
mini flowmeter
4 Pages
3A sanitary
2 Pages
saddle turbine
2 Pages
HP
2 Pages
subsea
2 Pages
Tri flo
2 Pages
Grooved turbine
2 Pages
Nor Mag
2 Pages
Transi-Flow II
2 Pages
Transi-Flow
2 Pages
HO series
2 Pages
LO-CO series
4 Pages
star industrial
2 Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list