Catalogs >
Hoffer Flow Controls >
star industrial

star industrial
2Pages

Catalog excerpts

Perfecting Measurement INDUSTRIAL +STAR+ SERIES for Liquid Flow Measurement TECHNICAL DATA SHEET FLOW RANGE (Note 1) Ranges shown are standard ranges; other ranges are available. Contact Hoffer Flow Controls, Inc. BEARING TYPE (Note 2) C = Hard Carbon Composite sleeve bearing (standard). BP= Shielded, self-lubricating hybrid ceramic ball bearing (optional 5/8" & below). CB = Shielded, self-lubricating hybrid ceramic ball bearing (optional 3/4" to 3"). PICKUP COILS (Note 3) 1M = Standard magnetic pickup coil. 1 MX = Magnetic pickup coil with 1 " riser on meter body for mounting of enclosures 1 MX3/0 = Magnetic pickup coil with 1" riser and enclosure Class I, Groups C & D. PED-CE = PED-CE mark required for Europe requires the operating temperature and pressure be given and will be marked on the housing. CE = CE mark required for Europe.

Open the catalog to page 1

PERFORMANCE SPECIFICATIONS Temperature Range: Signal Output: 10 MVRMS or greater into a 10K ohm load at minimum flow rate. Type 31 6/31 6L dual rated Stainless Steel (with exceptions noted below). Rotor: 17.4 PH Stainless Steel. Hard Carbon Composite (Standard). Shielded, Self-lubricating Hybrid Ceramic Ball Bearings (Optional). * Based on K-Factor Calibration at 70 °F. COMPANY PROflU HOFFER FLOW CONTROLS, INC. has been designing and manufacturing high quality turbine flowmeters since 1968. Our ^"STAR ^Series should be considered when cost is a primary concern. The 'A' STAR ^"Series is...

Open the catalog to page 2