The Turbine Flowmeter Company TECHNICAL DATA SHEET Wide flow turndown ranges for liquids. Linearity +1-2% of reading or better. Insertion meter for pipe sizes 2", 3" and 4". Industrial grade construction. 3-Point one centistoke calibration at minimum, mid-range & maximum linear or extended range. The Saddle Turbine Series of Insertion Flowmeters are designed for measuring liquid flow in 2", 3" and 4" diameter pipes with accuracies inherent in the flowmeter at a substantially lower price than in-line Designed for installation in metal, composite or plastic piping, the Saddle Series is an economical alternative to full-bore, in-line flow liquid flowmeters while providing good measurement performance in a rugged package. The rotor and signal housing is interchangeable for 2", 3" and 4" sizes in order to maximize its flexibility and requires only a change in the saddle fixture to change from one size to the next. The use of 316 stainless steel for the housing insert, 17-4 pH for the rotor, hard carbon composite sleeve bearings and PVC

SADDLE TURBINE ORDERING INFORMATION MODEL ST - A - B - C - D - E - F - G A. Process Pipe Style: 2/40 2/80 3/40 3/80 4/40 4/80 2” Pipe Schedule 40 2” Pipe Schedule 80 3” Pipe Schedule 40 3” Pipe Schedule 80 4” Pipe Schedule 40 4” Pipe Schedule 80 B. Minimum Flow Range in GPM: 2” 3” 4” Linear 25 58 150 Extended 20 54 N/A C. Maximum Flow Range in GPM: 2” 3” 4” Linear 275 650 1650 Extended 300 825 N/A D. Bearing: C Hard Carbon Composite Sleeve Bearing E. Pickup Coil: M/X M-L-3/8x1.52 with flying leads. Note: A 1” MNPT riser is supplied standard. It is not explosion-proof but is used as a riser for...