PREMIER GAS SERIES TURBINE FLOWMETERS BY HOFFER HO-PG-100C Think about it... If you could buy a proven gas flowmeter that costs less, has longer life, and better performance than ANY meter on the Market, would you? Turn the page to find out why you should. Perfecting Measurement TM www.hofferflow.com BEST TURBINE IN THE INDUSTRY 5-YEAR WARRANTY

The Hoffer Premier Gas Series turbine flowmeters provide extremely accurate gas measurement and at a cost less than typical mass or ultrasonic flowmeters. Combine these benefits and high reliability and you’ve got something to think about. Hoffer Premier Gas Series turbine flowmeters provide the following advantages: Exceptionally wide flow turndown ranges. Multiple rotor assemblies available with varying blade angles in each meter size to optimize meter performance for the flow range. Multiple coil outputs for signal redundancy, direction detection and meter diagnostics. NIST traceable gas calibrations...

General Specifications: Repeatability: Typically ± .5% (improved accuracy available as an option) Temperature Range: Pressure Ratings: ANSI flanges 150# through 2500#. DIN flanges upon request. Over range: 150% of maximum flow (intermittently). Pressure Drop Characteristics: See Charts 1 & 2 for select data. Consult factory for specific data. NPT and MS 37 degree flared are offered on smaller size flowmeters. Flanged fittings in ANSI and DIN standards are available on all sizes. Construction Materials: Body Rotor Bearings Flanges Special - 316 stainless steel standard. 17.4 PH stainless steel...

HO Series Turbine Flowmeter - Gas Size Selector Chart - Typical Data * Based on a Gas Density of 0.25 lbs/ft3 (4.00 Kg/m3) and 15-degree Rotor Blade Angle 15Nominal Flowmeter Size (Inches) 1/4 Estimated Maximum Pressure Drop (PSIG/kPa) 0.10/0.69 Nominal Range* Nominal Range * Nominal Range * Nominal Range * (ACFH) (SCFH) (Nm3/Hr) (MCFD) HO Series Turbine Flowmeter - Gas Size Selector Chart - Typical Data * Based on a Gas Density of 4.0 lbs/ft3 (64.08 Kg/m3) and 15-degree Rotor Blade Angle 15Nominal Flowmeter Size (Inches) 1/4 3/8 Estimated Maximum Pressure Drop (PSIG/kPa) 1.6/11.03 1.6/11.03...