video corpo

LO-CO series

LO-CO series

LO-CO series

Product catalog summary
Introduction
The document introduces the Lo-Co Series of turbine flowmeters by Hoffer Flow Controls, designed for economical liquid measurement solutions. These flowmeters are suitable for liquid utility and OEM applications, offering stainless steel construction and precision machining.

Specifications
  • Materials: 316 stainless steel with a 17.4 PH rotor.
  • Linearity: ±1%.
  • Repeatability: ±0.1% of reading.
  • Temperature Range: -150°F to +250°F.
  • Turndown Range: Refer to the chart provided.
  • Bearing Style: Hard carbon composite bearings.
  • End Fittings: Available in NPT and screw-on flanges.
  • Coil: Magnetic pickup coil with 6" lead wires.
  • Calibration: Average K-Factor on water, etched on the body.
  • Approvals: CE Compliant.

Features
  • Rugged, industrial design with stainless steel construction.
  • Available in nine sizes from ¼" to 2".
  • Compatible with corrosive and non-corrosive fluids.
  • Can be paired with PET signal conditioners/converters.

Operating Principle
The flowmeter uses an inlet flow straightener to reduce turbulence and improve velocity. The fluid rotates a vaned rotor, generating a pulsing electrical signal proportional to the flow rate.

Construction
The Lo-Co Series features a simplified internal construction with two hangers and a rotor assembly. The flow straighteners are tack welded for durability in abrasive applications.

Applications
Typical applications include liquid measurements in test separators, water and oil metering, and hydraulic systems.

Mounting Positions
Horizontal mounting allows the coil to be located in any 360º axis. Vertical mounting is acceptable with adequate back pressure.

Ordering Information
Customers are advised to provide details such as service liquid, flow rates, operating pressures, temperatures, line size, and viscosity for proper flowmeter sizing.

Size Selector Chart
The document includes a chart detailing size, end connections, pressure drop, burst pressure, working pressure, K Factor, frequency, and weight for each flowmeter size.

Notes
The document emphasizes the importance of verifying specifications with the manufacturer as they are subject to change.
See more

Catalog excerpts

LO-CO series-1

Hoffer's Most Economical Flow Solution... Lo-Co Series Tùrbine Flowmeters HOFFER FLOW CONTROLS, M.

 Open the catalog to page 1
LO-CO series-2

Introduction Hoffer Flow Controls presents the Lo-Co Series of low cost turbine flowmeters for customers working with a limited budget, a line that is a perfect fit for liquid utility and OEM applications. The Lo-Co Series provides you with the most economical flow solution while its outstanding features such as ALL stainless steel construction and precision machined components speak for themselves. The Lo-Co Series is available in nine line sizes and may be interfaced with our complete line of electronics including signal conditioners, converters, rate indicators/totalizers and flow computers....

 Open the catalog to page 2
LO-CO series-3

Size Selector Chart for Lo-Co Series Flow Range Burst Pressure Recommended Max. Working Pressure Typical K Factor Nominal Max. Frequency (GPM) Size Pressure Drop (in PSIG @max normal flow) (in PSIG) (With safety of 4) Pulses/ gallon (Hz) Standard With coil enclosure End Connections Weight (Lbs.) ¼" ½" .45 — 4.5 6 20,000 6,000 15,800 1,054 .45 .70 3 /8" ½" .8 — 8 7.5 20,000 6,000 9,850 1,314 .43 .70 ½" ½" 1.5 — 10 7 18,000 6,000 8,975 1,496 .43 .70 5 /8" ½" 1.7 — 17 4 18,000 6,000 5,400 1,530 .40 .70 ¾" ¾" 3 — 30 8 9,000 4,400 2,175 1,088 .50 .75 1" 1" 6 — 60 11 9,000 3,850 800 934 .80 1.05 1¼"...

 Open the catalog to page 3
LO-CO series-4

Ordering Information Basic Model Number LC A. Process Connection/End Fitting Size B. Flowmeter Size Dimensional Drawings ( A ) X ( B ) - LC ) (A)( D -) - (B) - (- F / (C) - ( H ) - ( I ) (E) G) Model ( C Lo-Co without Coil Enclosure A. Flowmeter Size Size D. Maximum Operating Flow (GPM) E. Bearing Type (C) Hard Carbon Composite Sleeve Bearing, all sizes B. Coils F. PickupCoil Riser/Enclosure (1M) (X) One MNPT Riser 3/8"Magnetic Coil only. PET-1 w/ Enclosure analog output mounted in enclosure. G. Riser(XB-1) & Explosion-Proof Coil0-10 VDC(Rated Class I, Groups C & D) (XB-2) PET-2 w/ 4-20mA analog...

 Open the catalog to page 4

All Hoffer Flow Controls catalogs and technical brochures

  1. CAT2

    2  Pages

  2. hogas

    2  Pages

  3. premgas

    4  Pages

  4. cat1

    2  Pages

  5. sy14b

    2  Pages

  6. HIT 2A

    48  Pages

  7. Nova flow

    4  Pages

  8. ACEII

    72  Pages

  9. ICE

    4  Pages

  10. Teflon series

    2  Pages

  11. HHP series

    6  Pages

  12. 3A sanitary

    2  Pages

  13. HP

    2  Pages

  14. subsea

    2  Pages

  15. Tri flo

    2  Pages

  16. Wingnut

    2  Pages

  17. Nor Mag

    2  Pages

  18. Transi-Flow

    2  Pages

  19. HO series

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.