cat1
2Pages

Catalog excerpts

HOFFER Perfecting Measurement TM Conditioners-Amplifiers-Transmitters Product Bulletin CAT1-001D TECHNICAL DATA SHEET OUTSTANDING FEATURES Loop powered 4-20mA. Optional flowmeter linearization. Factory configured when purchased with a Hoffer flowmeter. Several enclosure options. CE Compliant. Windows® Configuration Software. SPECIFICATIONS Input Signal Type: Magnetic pickup. Input Frequency Range: 0.2 Hz to 4 KHz. Signal Level: Power Supply: Loop Power 10-30 Vdc. Reverse polarity protected. Loop Burden Voltage: Analog Output: Analog Output Response Time: 1/8 sec. (Limited by frequency and MST settings). Load Resistance: Temperature Drift: RS232 port for configuration and diagnostics. PRODUCT DESCRIPTION The CAT1 is a microprocessor controlled 2-wire 4-20mA transmitter. The CAT1 converts a low level, frequency signal from a flowmeter sensor into an analog 4-20mA output. The output is proportional to the flow rate. INSTALLATION WIRING - Extruded Aluminum. DIN Rail Mount. Explosion-Proof. CE Compliant. Up to 20 point linearization. Windows® Configuration Software for Device configuration, diagnostics and monitoring. ®Windows is a registered trademark of Microsoft.

Open the catalog to page 1

ENCLOSURE OPTIONS ORDERING INFORMATION General Purpose Enclosure ENCLOSURE STYLE (1) GENERAL PURPOSE ENCLOSURE. .166 DIA MOUNTING HOLES HOFFER FLOW CONTROLS, INC 2" LONG DIN RAIL MOUNT SINGLE UNIT. UP TO 20 CAN BE MOUNTED ON A SINGLE RAIL. EXPLOSION-PROOF. LINEARIZED ANALOG OUTPUT 4 TO 20 MA UP TO 20 POINTS. (7) ACCURACY +/- 0.02% OF FULL SCALE. INPUT POWER (D) 8 TO 24 VDC LOOP POWERED. SPECIAL FEATURES (CE) MARK REQUIRED FOR EUROPE. (SP) ANY SPECIAL FEATURES THAT ARE NOT COVERED IN THE MODEL NUMBER, USE A WRITTEN DESCRIPTION OF THE –SP. 1. IF ENCLOSURE IS MOUNTED ON TURBINE FLOWMETER,...

Open the catalog to page 2