Sectional Directional Control Valve MCD10 andMCD25 Series Features MCD10 and MCD25 are manual sectional directional control valves MCD10 nominal flow is 80 liters/min MCD25 nominal flow is 380 liters/min at 350 bar operating pressure. Both valves are highly flexible and easily adaptable to most application. A wide range of options is available to cater widest range of application. HOF 140 www. h ofhyd raul ic.com

Ordering Code Sectional Control Valve |1st spool] 12nd spool| I 3rd spool! | 12th spool] | 8 | Circuit Option (Outlet cover) OC - With open center plug CO - With carry over plug CC - With closed center plug | 3 | Relief Valve Setting (Inlet cover) 210 bar 140 bar | 4 | Spool Control B Port Side L - Standard Lever | 5 | Spool Control A Port Side S - Spring retrum to center D - Detent in three positions I - Detent in two positions O - Detent out two positions | 6 | Spool Type (Type.1) 1 - Double acting, 3 position with A and B closed in center (Cylinder spool) (Type.2) 2 - Double acting, 3 position...

Sectional Control Valve Installation Dimensions mm (inch) MCD10 Specification Nominal Flow 80 L/min (21 USgpm) Max. Pressure 210 bar (3000 psi) Port A-B BSP 1/2”, SAE8, BSP 3/4"

Sectional Control Valve Installation Dimensions mm (inch) Specification Max. recommended flow Max. pressure Max. backpressure Tie rod tightening torque Installation Dimensions mm. (inch). OUTLET SECTION Pressure drop (P -T) A ibar) MCD-25/12 MCD-25/9 MCD-25/6 MCD-25/3 MCD-25/1 0 80 160 240 320 400 Qp (l/mfnj

Spools for Monoblock and Sectional Valves Spools Description Double acting, 3 position with A and B closed in center (Cylinder spool) Double acting, 3 position with A and B to tank in center (Motor spool) Single acting on A, 3 position B Single acting on B, 3 position A Spool Control B Port side Standard Lever