High Pressure Single Vane Pump HT6C/HT6D/HT7E Series Features • HT6C, HT6D and HT7E Series are fixed displacement and balanced type single vane pumps. The pump is designed for higher operating pressure and greater flow at the same housing size. • With a balanced pin-vane design, outlet pressure is continuously applied only the pin. The pin provides the steady light force against the vane. Top and bottom areas of the vane are subject to the same pressure, either inlet or outlet pressure, depending on the vane’s location during rotor rotation. This pin-vane design minimizes noise level and improves volumetric effciency. • With the cartridge independent of the shaft, allowing for easy change of flow capacity and field servicing without removing the pump from its mounting.

Ordering Code Single Vane Pump Shaft Rotation (Viewed from shaft end) Omit - Turn right - Turn left Inlet Port position (Viewed from cover end) Ring Size (USgallon) 00 - Opposite Outlet ๐ 02 - 90 CCW from Outlet 01 - Inline with Outlet ๐ 03 - 90 CW from Outlet Shaft For HT6C 1 - SAE B Keyed Shaft 2 - Keyed Shaft 3 - SAE B Splined Shaft 4 - SAE BB Splined Shaft For HT6D 1 - SAE C Keyed Shaft 2 - Keyed Shaft 3 - SAE C Splined Shaft 4 - Splined Shaft For HT7E 1 - SAE CC Keyed Shaft 2 - Keyed Shaft 3 - SAE C Splined Shaft (*Special shaft for mobile use available upon request)

Installation Dimensions mm (inch) 12.7 (.50) Shaft 2 Keyed Shaft Mounting Torque 159 Nm (117 ft.lbs) Class 1-J498b 13 Teeth 30 Deg Pressure Angle 16/32 Pitch Major Dia 21.79/21.54 (.858/.848) Minor Dia 18.62/18.34 (.733/.722) Flat root side fit Shaft 4 SAE BB Splined Shaft Shaft 3 SAE B Splined Shaft Class 1-J498b 15 Teeth 30 Deg Pressure Angle 16/32 Pitch Major Dia 24.98/24.71(.983/.973) Minor Dia 21.80/21.53 (.858/.848) Flat root side fit Shaft 1 SAE B Keyed Shaft 6.35/6.30 SQ KEY (.250/.248)

Installation Dimensions mm (inch) 15.7 (.62) Shaft 2 Keyed Shaft Mounting Torque 187 Nm (138 ft.lbs) Shaft 4 Splined Shaft Class 1-J498b 14 Teeth 30 Deg Pressure Angle 12/24 Pitch Major Dia 31.22/30.96 (1.229/1.219) Minor Dia 26.99/26.66 (1.063/1.050) Flat root side fit 212.4 (8.36) Class 1-J498b 14 Teeth 30 Deg Pressure Angle 12/24 Pitch Major Dia 31.22/30.96 (1.229/1.219) Minor Dia 26.99/26.66 (1.063/1.050) Flat root side fit Shaft 3 SAE C Splined Shaft Shaft 1 SAE C Keyed Shaft 7.94/7.89 SQ KEY (.313/.311)

Installation Dimensions mm (inch) SAE C INVOLUTE SPLINE DATA CLAS 1-FLAT ROOT SIDE FIT J498b-PITCH 12/24 14 TEETH-30° PRESSURE ANGLE Displacement cm³/r (in³/r) Weight Max Max Max Max Speed Speed Intermittent Continuous Pressure Pressure rpm rpm bar (psi) bar (psi) kg (lb)