Cartridge Kit HM2-210 Series

Product catalog summary

Features:
The HM2-210 series vane motors are designed with spring-loaded vanes, ensuring smooth operation across a wide speed range. These motors can be reversed or stalled under load without damage, provided proper relief protection is applied. It is crucial to connect a full-size unrestricted drain line directly from the case drain to the reservoir return, positioned below the lowest fluid level in the system.

Replacement Parts:
The cartridge kit design allows for easy repair and interchangeability between pumps, enhancing maintenance efficiency.

Ordering Code and Specifications:
The HM2-210 series offers models with nominal torque ratings of 25 lb.in per 100 psi and 35 lb.in per 100 psi. The displacement for these models is 24.7 cm³/r (1.51 in³/r) and 35.4 cm³/r (2.16 in³/r) respectively. Maximum speeds are 2200 r/min at 138 bar (2000 psi) and 1800 r/min at 121 bar (1750 psi), with an approximate weight of 1.37 kg (3.0 lb).

Installation Dimensions:
Detailed installation dimensions are provided in millimeters (inches) to ensure proper setup and integration into hydraulic systems.

Catalog excerpts

Cartridge Kit for Vane Motor HM2-210 Series Features Replacement parts for High Torque Vane Motors (HM2) A cartridge kit design feature allows for easy repair and interchangeability between pumps. Motors are constructed with spring loaded vanes offering smooth operation over a wide speed range. Motors can be reversed or stalled underload without damage to the unit when proper relief protection is applied. A full size unrestricted drain line must be connected directly from case drain to reservoir return located below the lowest fluid level in the system. Ordering Code and Specifications Cartridge Kit for Vane Motor Ring size - Nominal torque Rating 25 - 25 lb.in Per 100psi 35 - 35 lb.in Per 100psi Model Seies Maximum speeds & Pressure

Open the catalog to page 1