Sliding Gates
12Pages

Sliding Gates Self-supporting construction, high security standards, completely pre-assembled

Hörmann sliding gates in a sophisticated design The ideal protection for wide passages Hörmann sliding gates made of stable steel profiles are delivered as a door set, with an opening width of up to 16 m. Thus, with 2-element versions, a width of 32 m can be attained. The construction is self-supporting. Your advantages: very little foundation work, no guide rail fitting and no gate travel malfunctions due to ice, snow or heavy soiling. Always optimally aligned Pre-tensioning the gate leaf construction reduces distortion. A tension element allows the height of the front edge to be corrected...

Innovative Gate Technology The difference is in the detail Sliding gate operator integrated invisibly into the bottom beam This is not only the most attractive solution, but also offers more protection from adverse effects of the weather and unauthorised access at the same time. Manual operation in case of power failure In case of power failure, you can quickly and easily switch the gate from electric to emergency operation. The gate can then be opened or closed in manual emergency operation with very little effort. Heavy-duty polyamide track rollers Polyamide is a wear-resistant material,...

Steel Sliding Gates HSS A basic version with a door width of up to 9 m The Hörmann sliding gate HSS consists of high-quality individual components and requires a comparatively low investment sum. The HSS sliding gate offers a convenient package and fits beautifully and harmoniously into your premises. It is in no way inferior to sliding gate HS when it comes to safety and quality. Depending on the width of your entrance, you can choose between two gate types and additional equipment options: Bottom beam height 160 mm / bottom beam depth 165 mm Clear passage width up to 7000 mm Operator...

Steel Sliding Gates HS An individual version with a door width of up to 16 m The first impression is crucial – this is why it is important that your business associates, visitors and employees immediately get the right impression upon entering or driving into your premises. This is ensured by the wealth of design possibilities available to you with this gate. Individual demands require customised solutions. Depending on the width of your entrance, you can select between four gate types and many optional extras: Bottom beam height 160 mm / bottom beam depth 165 mm Clear passage width up to...

Aluminium Sliding Gates HS Alu A basic version with a door width of up to 13 m The Hörmann aluminium sliding gate HS Alu is an alternative to large gates. With the patented modular design of the bottom beam, gates with a clear passage of up to 13 m can be produced inexpensively. The inlaid silver strip gives the heavy-duty gates a distinctive, delicate look. You can choose between four gate types and many accessory variants, depending on the width of your entrance: Bottom beam height 200 mm / bottom beam depth 175 mm Clear passage width up to 7000 mm / 9000 mm** Operator power 0.18 kW...

Special Equipment Climb-over protection Climb-over protection consists of a 50-mm-high spiked ledge, which is welded along the entire length of the top beam. Flashing warning light The installed flashing warning light serves as a safety precaution to prevent accidents. Fence fixing The fence fixing attached to one side of guide post or front post is perfectly matched to the gate’s design. LED rotating warning light On request, the rotating warning light, fitted to the base of the guide post, is also available with a protective cage. Side pedestrian door The single-leaf door is 1000 mm wide...

Option: Tubular fitting A D A  = clear passage width Not required for electrical operation An on-site protection fence in accordance with DIN EN ISO 18357 (mesh < 18.5 mm) or an additional electro-mechanical safety contact strip are required for gate type HSS with impulse control. G E Gate opening seen from the outside, to the right Gate travel axis Tube C Ø 50 Gate opening seen from the outside, to the right Possible fence direction Connecting lead in accordance with VDE regulations L ≤ 100 m = NYY 5 × 2.5 mm² L ≥ 100 m = after consultation No tube for manually operated gates a 250...

Centre of buffer roller Length of main foundation Centre of front post Bottom beam height Total required length Centre distance to the stopper Centre distance to the buffer roller Centre distance to the main gate posts Bottom beam length Sliding length Centre distance of stations Gate frame height Post distance Available total gate height Gate post height Total gate weight with a gate height of 2 m (kg) Gate leaf Clear passage width (m) B + approx. 115 mm From top edge of foundation B – 100 mm From top edge of foundation (+/– 0) 7650 B + approx. 115 mm From top edge of foundation 7150...

Technical Data A = clear passage width Optional recess Approx. 100 mm distance to ground Tube for on-site connection cable, supply Gate travel axis Gate opening seen from the outside, to the right Connecting lead in accordance with VDE regulations L < 100 m = NYY 5 × 2.5 mm Rear buffer roller L ≥ 100 m = after consultation Required from 5000 mm LD Possible fence direction Tube Ø 100 (not required for manual gates) Protection fence An on-site protection fence in accordance with DIN EN ISO 13857 (mesh < 20 mm) or an additional electro-mechanical safety contact strip are required for gate type...

Main foundation to the buffer roller foundation Length of main foundation Front post foundation to the main foundation Total required length Bottom beam height Centre distance to the buffer roller Centre distance to the main gate posts Bottom beam length Sliding length Centre distance of stations Gate frame height Post distance Available total gate height Gate post height Total gate weight with a gate height of 2 m (kg) Gate leaf Clear passage width (m) Alu double post: B + 110 Steel post: B + 115 B – 100 mm From top edge of foundation (+/– 0) Preferred dimensions (mm):...