BrikStar iSwarf Hydraulic briquetting press for metalworking operations.

Volume reduction up to 90%. BrikStar iSwarf Hydraulic briquetting press for metalworking operations. Effective use of potential. Metalworking often produces large amounts of waste products such as metal chips and shavings, whose value is not recognised or exploited. This waste material is usually disposed of at great cost due to the high proportion of cooling lubricants or the proceeds from selling the scrap are negligible. However, this waste can be optimally used in a highperformance briquetting press from HÖCKER POLYTECHNIK. The BrikStar iSwarf 440 and 550 briquetting presses provide the ideal...

All the advantages of the BrikStar iSwarf: • Compact and space-saving design • Adjustable compression pressure • Easily adjustable briquette density • Low wear due to optimised compression zone • No assembly required – supplied ready to plug in • Savings of up to 95% on new oil or emulsion quantities • Lower storage, transportation and disposal resources • Added value through the sale of metal briquettes • Sustainable and environmentally friendly operation • Almost complete prevention of corrosion of metal shavings • Briquettes with low residual moisture for optimal melting

BrikStar iSwarf – the flexible solution. This new series combines the advantages of a compact space-saving machine with the advantages of a large briquetting press with high briquetting performance. The machinery can be equipped to meet the individual requirements and needs of the customer. Briquette diameters of 50-100 mm and throughput rates of 60-600 kg/h allow for customised briquetting solutions. The optimised hydraulic system contributed to a considerable increase in energy efficiency. For example, with only 4 kW hydraulic power, up to 200 kg/h of metal shavings can be compressed. A PLC-controlled...

Technical data « Visualisation example Briquette diameter Briquette length Drive motor hydraulic

An investment that pays off. Highly efficient solutions are achieved with the use of a BrikStar iSwarf from HÖCKER POLYTECHNIK in the production process by converting expensive production waste into usable materials. Whether recycling, resource recovery, dehydration or de-oiling, etc., the applications are varied: • In the briquetting process, chips are separated from cooling lubricants or cutting oils. These oils can be cleaned immediately and re-circulated into the operating cycle. A major cost factor is eliminated as savings of up to 95 per cent on cooling lubricants or cutting oils can be...