• • • • • • • • • • • • 19“Up to 12 channels in 19“-2HU User defined configuration with modules in 3 voltage and 4 power categories Modules with 150W - 300W - 450W - 600W power rating Voltages 60V - 120V - 240V, Currents from 4.5A to 80A Current- Voltage- ResistanceCurrent- Voltage- Resistance- Power Mode Dynamic Mode 1800W total power SCPI programming syntax with measuring function Full protection Analog monitor outputs for voltage and current Analog control input RS232RS232- und GPIB Schnittstelle

—————– —————–— Function And Configuration —–——————— 2 Configuration Configurable Multi Channel Load The PMLI Electronic Multi Channel Load provides slots for up to 12 load modules. There are different load modules with power rating of 150W , 300W, 450W and 600W available. Depending on the power a load module occupies one (150W), two (300W) three (450W) or four slots (600W). The modules are available in three voltage categories 60V, 120V and 240V . So any desired load can be configured as for example: 1x600W + 1x450W + 2x300W + 1x150W The total power is max. 1800W. In this way the PMLI Multi Channel...

Load Modules And Interfaces Load Modules Load Modules are available in three voltage and four power categories. The load terminals are implemented as pluggable terminal blocks. The load inputs are galvanically isolated from each other. Analog Monitor Outputs, analog Control Input For every channel monitor outputs 0-1OV for voltage Current setting can also be made by an analog control Leading the air from the front panel to the back panel allows gapless installation in rack systems. The temperature-controlled fans work at an acceptable noise level are available in the following versions: PMLI-M...

-Technical Data - Order Numbers- Model Overview Technical Data Input Voltage: Continuous Power: below linear derating of the load current towards Input capacity: Input Impedance: Dynamic Current: Voltage, Resistance, Trigger voltage: Setting range see model overview >50kQ when input is turned off Two current levels and two programmable SW-regualtion with programmable regulation para- Depending on the accuracy of the measuring function for voltage and current as well as on the accuracy of current setting Programmable Trigger voltage (Load is turned off at input voltages below the trigger voltage...