Power Distribution Source-Sink AC & DC Multi-Channel Mulit-Channel, GUI Energy Recycling Multi-Range High Power Low Power H&H Electronic Loads, PLA Series Interface overview • Analog I/O Port as standard • Optional Ethernet + USB + RS-232 • Optional CAN Interface • Optional GPIB Interface (only at PLA4XX, PLA8XX and PLA12XX) • CC - CV - CR - CP mode • Optional MPPT (in preparation) • SCPI programming with DAQ function • Dynamic loads • Protections for current and voltage • Temporary overload capacity, depending on model • Electronic protection • Silent fan cooling • 19...

Functions PLA Series Overcurrent and undervoltage protection An overcurrent or undervoltage protection may be activated and varied. The active protection works in all operating modes. Undervoltage protection works in two different modes: • regulating transition at slow regulation speed (e.g. bat tery discharge) • switching transition at fast regulation sped (short dead time, e.g. when switching the input voltage ) Load profiles (LIST) In all operating modes PLA series loads can generate dynamic load profiles. Up to 100 settings with variable dwell and ramp time are...

Power Distribution Source-Sink AC & DC Multi-Channel Mulit-Channel, GUI Energy Recycling Multi-Range High Power Low Power H&H Software Tools PLA Series Setting Menu The PLA Tool is a graphical software tool free of charge. It controls PLA series Electronic Loads. The user can choose different functions with the aid of the navigation bar. The most important load settings are done in the Main Menu ("Settings"). Several graphical widgets inform the user about the measurements and the current device status. Further on, a data logging function can be activated in the Main Menu....

Power Range 200 W ... 400 W DC PLA Series Model (order number) | Model (order number) Model (order number) On request we provide also models with low current in mA range. 1) Level and duration of the peak power 4) Load terminate Type of terminate 5) Measured at the front in distance of depend on the previous load. 2) The setting range corresponds to the peak power. 3) Rise and fall times are defined of 10 ... 90 % and 90 ... 10 % of the maximum current (current mode FAST, tolerance ±20 %). Rise and fall time at setting „slow": ca. 500 ps- FKS20/4-SM8 Flat copper bar 20 x 4 mm,...

Power Distribution Source-Sink AC & DC Multi-Channel Mulit-Channel, GUI Energy Recycling Multi-Range High Power Low Power H&H Power Range 800 W ... 1200 W DC PLA Series Model (order number) | Model (order number) Model (order number) On request we provide also models with low current in mA range. 1) Level and duration of the peak power 4)L°ad terminate Type of terminate 5) Measured at the front in distance of depend on the previous load. 2) The setting range corresponds to the peak power. 3) Rise and fall times are defined of 10 ... 90 % and 90 ... 10 % of the...

Display Resolution PLA Series Model Terminal Versions PK4-30L Binding post 4 mm FKS20/4-SM8 Flat copper bars 20 x 4 mm with screws M8 BPK4-60L Binding post 4 mm touch-protected Subject to modification without notice, errors and omissions expected Power Distribution Source-Sink AC & DC Multi-Channel Mulit-Channel, GUI Energy Recycling Multi-Range High Power Low Power H&H

Power Distribution Source-Sink AC & DC Multi-Channel Mulit-Channel, GUI Energy Recycling Multi-Range High Power Low Power H&H Operating and Connecting PLA Series 14 Subject to modification without notice, errors and omissions expected

Power Distribution Source-Sink AC & DC Multi-Channel Mulit-Channel, GUI Energy Recycling Multi-Range High Power Low Power H&H Subject to modification without notice, errors and omissions expected

Power Distribution Source-Sink AC & DC Multi-Channel Mulit-Channel, GUI Energy Recycling Multi-Range High Power Low Power H&H Options, Mechanics and Rack Installation PLA Series PLA10 for one 1 HU device PLA11 for two 1 HU devices Available Data Interfaces and Options PLA02 Only at 400 W, 800 W and 1200 W models PLA01 necessary 16 Subject to modification without notice, errors and omissions expected

Resistance (at V = 5 ... 100 % of the voltage range) Power (at U or I > 10 % of the range) (at U and I 5 ... 10 % of the range) of the setting value of the corresponding range of the measured value (actual value) is calculated from voltage and current is calculated from voltage and current Sampling rate Accuracy of displays (User Interface) Display User Interface Resolution accuracy of each measurement, ±1 Digit of the display value see resolution of display at page 11 Dynamic function (LIST) Number of load levels max. 100, with ramp and dwell time setting Dwell time Ramp time Accuracy of setting...

General Standard Terms and Conditions of Business (GTC) of Höcherl & Hackl GmbH (H&H) Version 05.03.2015 § 1 General Information - Scope of Application (1) Our General Standard Terms and Conditions of Business shall apply exclusively; we shall not recognize any terms or conditions on the part of the customer that oppose or deviate from our General Standard Terms and Conditions of Business unless we have expressly agreed to their applicability in writing. Our General Standard Terms and Conditions of Business shall apply even if we carry out delivery to the customer without reservation in the knowledge...

(10) The period of limitation in the case of a delivery claim to damages in accordance with Sections 478, 479 of the German Civil Code [BGB] shall remain unaffected; it shall amount to five years as of delivery of the defective item. (11) Required material and working hours shall be calculated following elapse of the warranty period. The purchaser of the service (customer) shall be responsible for both the forwarding expenses to us and return shipment. In the case of on site repairs the costs of travel and the return journey, mileage and, if necessary, overnight accommodations shall be additionally...