® Stickmate LX 300 AC/200 DC 257885 June 2012 AC/DC Stick (SMAW) Arc Welding Power Source he Stickmate LX 300 AC/200 DC power sources let you choose between AC or DC weld output to expand your welding options to either AC or DC Stick electrodes. DC output means fewer arc outages, less sticking, less spatter, better control on thin work, and easier out-of-position welding. AC output produces less arc blow. T 230 Volt Accu-Set™ design provides accurate heat control with infinite amperage control. This Stick welder also allows a higher duty cycle when amperages decrease to give you more arc time when welding thinner materials. Applications: Farms Ranches Ornamental Iron Garages #500560 Includes: 15-ft. (4.5 m) electrode cable with heavy-duty holder 10-ft. (3 m) work cable with clamp Power cord Hobbyists Maintenance Individuals Features Benefits Strongest weld power 300 amps enable you to get through the big jobs. Infinite current control Simple precision control allows you to fine-tune the arc in one-amp increments. Accu-Set amperage indicator Clearly shows the amperage setting you plan to weld at. AC/DC output Enables use of specialty electrodes for a variety of metals including mild steel, cast iron, aluminum and more. Self-resetting thermal overload protection Protects power transformer from thermal overload to ensure reliability. Hobart’s 5/3/1 Industrial Warranty Better protection for your investment; up to five years on critical components. Designed, assembled, serviced and supported in Troy, Ohio USA Industrial-quality products with time-tested reliability since 1917. ™ Specifications (SUBJECT TO CHANGE WITHOUT NOTICE.) Mode Rated Welding Output AC 250 A at 32.5 VAC, 20% Duty Cycle at 60 Hz 15% Duty Cycle at 50 Hz DC 175 A at 25 VDC, 20% Duty Cycle at 60 Hz 15% Duty Cycle at 50 Hz Welding Amperage Range High Low Amps Input at Rated Output, 230 V, 50/60 Hz Max. OpenCircuit Voltage 180 – 300 A 72 80 V 40 – 200 A 30 – 200 A 65 Certified by Canadian Standards Association to both the Canadian and U.S. Standards. Dimensions H: 18-3/4 in. (476 mm) W: 12-3/4 in. (323 mm) D: 17-1/2 in. (445 mm) Net Weight 132 lb. (60 kg)

Electrode Charts Control Panel ELECTRODE POLARITY CHART ELECTRODE/AMPERAGE CHART "7018 AC recommended for use with AC welders. 3. Over Temp Light Performance Data DUTY CYCLE CHART % DUTY CYCLE Basic Equipment Setup Stick (SMAW) Stick Electrode Work Clamp Running Gear Mounts easily to unit portability, with various suit user preference. Hobart Welders An Illinois Tool Works Company Hobart Welding Products Service 800-332-3281 Sales 800-626-9420 Online Forum