120/240-Volt Portable Air Plasma Cutter 120 V 240 V Quick Specs Rated Output 120 V (15 A): 20 A at 88 VDC, 35% duty cycle 120 V (20 A): 27 A at 92 VDC, 20% duty cycle 240 V: 27 A at 92 VDC, 35% duty cycle Mild Steel Cutting Capacity Rated: At 20 amps: 5/16 in. (8 mm) Max. Cut: At 20 amps: 3/8 in. (9.5 mm) Rated: At 27 amps: 3/8 in. (9.5 mm) Max. Cut: At 27 amps: 5/8 in. (15.9 mm) 12 ft. (3.7 m) XT30R hand-held torch 12 ft. (3.7 m) work cable with clamp 10 ft. (3 m) power cord with 5-15P (120 V, 15 A) and 6-50P (240 V, 50 A) MVP™ plugs Easy-to-connect, built-in gas/air filter and regulator for extra protection Extra consumables (2 tips, shield deflector, and electrode) Versatile, powerful cutting in a lightweight power source. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The Airforce 27i features a multi-voltage plug (MVP™) that allows you to connect to common 120- or 240-volt power receptacles without using any tools. You can easily transport this plasma cutter to the job, connect to power and begin cutting up to 5/8-inch material on 240-volt power quickly. Applications Maintenance Body Shops Light Construction HVAC Features Benefits HOBART WELDING PRODUCTS Hobart Welding Products An ITW Welding Company Sales: 800-626-9420 Service: 800-332-3281

Specifications (Subject to change without notice.) pjjL * Travel speeds are approximately 80%> of maximum. Cutting at 20 Amps (120 V, 15 A service with 5-15P MVP) Note: Recommended maximum piercing capacity for hand-heid applications is 1/8 in. (3.2 mm). Maximum sever cut of 3/8 in. (9.5 mm). For aluminum and other metals with high thermal conductivity, cutting capabilities will be derated as much as 30%. Note: Recommended maximum piercing capacity for hand-held applications is 3/16 in. (4.8 mm). Maximum sever cut of 5/8 in. (15.9 mm). For aluminum and other metals with high thermal conductivity,...

Accessories The following accessories are available through Miller/Hobart Service Distributors. Plasma Standoff Roller Guide 253054 Helps maintain recommended standoff distance to maximize cutting performance and improve tip life. In-Line Air Filter Kit 228926 Mounts to the back of the AirForce® 27i and 40i. Includes male and female 1/4-inch NPT quick disconnect fittings and hose for easy on/off connection. The replaceable filter element filters to .85 microns. In-Line Air Filter Replacement Element 228928 Includes one replacement filter for in-line filter kit 228926. MVP™ Adapter Plugs Protective...

(300(1 ©2018 Hobart and the Hobart logo are trademarks of Illinois Tool Works, Inc. HOBART WELDING PRODUCTS