1. Catalogs
  2. HMC Europe GmbH
  3. HMC CYCLONE multiposition stirrer

HMC CYCLONE multiposition stirrer

HMC CYCLONE multiposition stirrer
1 / 12 PagesView full catalog

HMC CYCLONE multiposition stirrer

Product catalog summary
Company Profile: HMC Europe specializes in laboratory and sterilization equipment, focusing on quality, competence, innovation, and reliability. Certified under DIN EN ISO 9001, they offer products like tabletop sterilizers and vertical autoclaves for biotechnology, clinical laboratories, and environmental research.
Product Specifications: The document details various magnetic stirrers and sterilizers, including dimensions, power specifications, and operational conditions. Notably, CycloPower models have a rotation speed of 100-1000 rpm and power of 7 to 20 watts. The Cyclone series features electronic multipoint magnetic stirrers with microprocessor control and stainless-steel housing.
Sterilization Procedures: Steam sterilization is preferred for its effectiveness in microbiological applications, using a pressure vessel with saturated steam at specific temperatures and pressures (121°C at 1.1 bar or 134°C at 2.2 bar). Proper venting and exhaust-air filtration are crucial for safety and effectiveness.
Selection Criteria: Criteria for selecting sterilization equipment include legal compliance, space requirements, and cost. Emphasis is placed on calibration, validation, and customer service to ensure quality and safety.
Innovative Technology: HMC's magnetic stirrers use a coil system for consistent solution mixing. The Cyclone series, with its flat design and no moving parts, is ideal for mass screenings and various laboratory applications.
Additional Features: Options like the CycloBloc 15-58 offer integrated heating up to 200°C for quality control and chemical testing. The CycloSub series provides remote-controlled magnetic stirrers for water baths.
Product Specifications:
  • 90016 CycloBar R 25/8 T: Cylindrical magnetic bars made of rare earth, dimensions Ø 8 mm x 25 mm (L).
  • 90017 CycloBar R 40/14 T: Triangular magnetic bars made of rare earth, dimensions 40 x 14 mm.
  • 90038 CycloBath: Acryl-Waterbath with external dimensions 540 x 310 x 210 mm and internal dimensions 515 x 255 x 160 mm.
  • 90039 CycloTherm Immersion Thermostat: Models CycloPower 7 and CycloPower 20 with rotation speed range of 100 - 1000 rpm, nominal power of 7 W and 20 W, dimensions of 6.5 x 10 x 7 mm and 14.5 x 13 x 5.5 mm, and weights of 0.35 kg and 0.6 kg. Permissible ambient temperature is 0° to +40° C at 80% relative humidity. Input voltage is 230 VAC / 50 - 60 Hz, output voltage is 19 VDC.
Company Information: HMC EUROPE GMBH has 80 years of experience in sterilization, offering comprehensive support from purchase to maintenance. Their goal is to simplify and enhance the sterilization process for customers. Contact: Phone: +49 8633 – 50 54 205, Fax: +49 8633 – 50 54 210, Email: [email protected], Website: www.hmc-europe.com, Address: Kellerstr. 1, 84577 Tüssling, Germany.
See more

Catalog excerpts

HMC CYCLONE multiposition stirrer -3

HV SERIE > HMC steam sterilizers, vertical units 25, 50, 85 and 110 litres Laboratory- and sterilization equipment HG SERIE > HMC steam sterilizers, vertical units 50 and 80 litres Service means serving - serving you, the customer. We take that literally! You benet from 80 years of experience in sterilization experience you can put to work for you when looking for solutions to complicated problems and dicult tasks with limited resources. We oer simple and cost-eective solutions. And after your purchase? We deliver on time and give you a thorough introduction to your unit. From rst commissioning...

 Open the catalog to page 3
HMC CYCLONE multiposition stirrer -4

The high heat storage capacity of water, the additional heat released during the condensation of steam and the moisture contained in the steam form the basis of the excellent microbiological eect of steam. By contrast with chemical sterilization or sterilization with hot air, both of which are suita-ble only for heat-resistant materials such as glass or metal instruments, steam sterilization is the generally accepted sterilization mode in the microbiological laboratory. From sample preparation to destruction sterilization, steam sterilizers (or autoclaves) can be used in an environmentally friendly...

 Open the catalog to page 4
HMC CYCLONE multiposition stirrer -5

What legal provisions must be complied with? Genetic engineering laws, laws concerning the prevention of epidemics... Must other provisions be met? GLP, GMP... Space requirements, minimum sterilization chamber volume Uses: Sample preparation, waste sterilization Sterilization of high infectious materials, documentation Calibration, validation, qualications - what requirements must be fullled? Constructive requirements, electricity, demineralized water, disposal... > Operating and secondary costs Customer service Safety, quality and price >

 Open the catalog to page 5
HMC CYCLONE multiposition stirrer -8

Flat electronic single-position magnetic stirrer without moving partsFor stirring volumes up to 700 ml Remote-controlled single-position magnetic stirrer, stainless steel housingHermetically sealed, for use in apparatus and water baths Stirring drive, diameter 60 mm, height 25 mm, integrated M4-threaded bore for attaching the magnetic stirrer at the bottom of housings Inclusive control unit CycloPower with 20 or 7 watt, continuously adjustable, cable 1.9 mProtection class DIN 40050 IP 68 > Flat electronic single-position magnetic stirrer without moving parts For stirring volumes up to 1200 ml...

 Open the catalog to page 8
HMC CYCLONE multiposition stirrer -9

Magnetic stirring block with 15 bores, for stirring and tempering up to 200 C. The probes to be mixed will be tempered collaterally. Thereby temperature rises quick and in connection with the mixing eect there is a minimized temperature gradient. By starting using the device directly (without additional control device), this mixing block thermostat is very compact and space-saving. This device is perfectly suited for dierent applications: for quality control in chemical and waste-water technology, for viscosity measurements, in combinatorial chemistry, for biolo- gical applications and for testing...

 Open the catalog to page 9

All HMC Europe GmbH catalogs and technical brochures

  1. Catalogue

    20  Pages

  2. Model HGD 113

    2  Pages

  3. Model HG 80

    3  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.