Catalogue Linear actuators
20Pages

HIWIN. Motion Control & Systems

HIWIN GmbH Brücklesbünd 1 D-77654 Offenburg Phone +49 (0) 7 81 9 32 78 - 0 Telefax +49 (0) 7 81 9 32 78 - 90 info@hiwin.de www.hiwin.de All rights reserved. Complete or partial reproduction is not permitted without our permission. Note: The technical data in this catalogue may be changed without prior

Motion Control & Systems Linear Actuators Linear Actuators HIWIN linear actuators are not only employed in the fields of rehabilitation and home care but also in industrial technology. They are characterized by a light and compact design, high rigidity, user-friendly handling, easy installation and low operating noise. An inserted gear convey the rotary motion of the engine to a buttress or a ballscrew. This one converts the rotary motion into linear motion. In addition to our standard versions HIWIN linear actuators can also be designed according to the individual wishes of our customers.

Linear Actuators Contents

Motion Control & Systems 2.1 Selection of HIWIN linear actuators 8 2.2 Installation of the HIWIN linear actuators 8 2.3 Safe operation of HIWIN linear actuators 8

Linear Actuators Product overview

HIWIN linear actuator LAS1 o Standard cylinder o Thrust from 600 to 1,200 N o IP54 HIWIN Motion Control & Systems HIWIN linear actuator LAS3 Page 12 o Standard cylinder with distance measuring system o Thrust from 600 to 1,200 N o IP54 HIWIN linear actuator LAN5 o Heavy load cylinder Customer specific linear actuators Page 16 o Customised versions o Wide range of options

Linear Actuators General information 2. General information 2.1 Selection of HIWIN linear actuators Step 1: Calculating load and speed The model selected from the various HIWIN linear actuators depends on the operating environment, the load levels, and the required speed. Step 2: Required stroke and zero stroke length The required stroke depends on the application. The zero stroke length (RL) is the minimum length of a linear actuator with fully retracted piston rod. Accordingly, the maximum length with fully extended piston rod is the zero stroke length plus the selected stroke. Step 3:...

Motion Control & Systems o Linear actuators without integrated limit switches or overload protection may be operated only within the specified nominal stroke. o Linear actuators are powered from a DC supply. The DC motor's polarity must be reversed for reversed movements. Additional braking effects can be obtained when a suitable switch is fitted to short circuit the motor. This braking effect is not generated when the equipment is stationary. o The linear actuators must be operated within the specified load limits. Linear actuators have been approved for a range of IP codes. Make sure that...

Linear Actuators HIWIN linear actuators LAS 3. HIWIN linear actuators LAS 3.1 LAS1 Product specifications: Standard cylinder Screw type: ACME Weight (at a stroke of 200 mm): 1.04 kg Protection class: IP54 Operating temperature: + 5 °C to + 40 °C 3.1.1 Order code Linear actuator Customer specific model (This suffix is not used for standard versions) Type: 1: With internal limit switches Motor cable length 1000 mm lang RL = S + 119 RL: Zero stroke length [mm] S: Stroke [mm] Note: If the mounting lugs do not lie precisely flush, the piston rod may twist as far as 180° anticlockwise.

3.1.3 Product characteristic curves and technical data 30 Speed [mm/s] Load [N] Table 3.1 Technical data LAS1 Model Max. holding Speed Standard stroke S [mm] force load = max/load = 0 [N] [mm/s] Duty cycle [%]

Linear Actuators HIWIN linear actuators LAS 3.2 LAS3 Product specifications: Standard cylinder Distance measuring system Screw type: ACME Weight (at a stroke of 200 mm): 1.27 kg Protection class: IP54 Operating temperature: + 5 °C to + 40 °C Potentiometric sensor (10 kΩ): RL = S + 154 3.2.1 Order code Linear actuator Customer specific model (This suffix is not used for standard versions) Type: 1: With internal limit switches RL = S + 146 RL: Zero stroke length S: Stroke Note: If the mounting lugs do not lie precisely flush, the piston rod may twist as far as 180° anticlockwise. Table 3.2...

3.2.3 Product characteristic curves and technical data 30 Speed [mm/s] Load [N] Table 3.3 Technical data LAS3 Model Max. holding Speed Standard stroke S [mm] force load = max/load = 0 [N] [mm/s] Duty cycle [%]

HIWIN linear actuators LAN 4. HIWIN linear actuators LAN 4.1 LAN5 Product specifications: o Heavy load cylinder o Thrust up to 8,000 N o Screw type: ACME o Weight (at a stroke of 200 mm): 1.96 kg o Protection class: IP66 o Operating temperature: + 5 °C to + 40 °C Linear actuator Model- Type: 1: With internal limit switches Stroke [mm]- Customer specific model (This suffix is not used for standard versions) Colour: G: Grey Operating voltage: 24: 24 VDC 24Q: 24 VDC (type with higher speed) LAN5-1: Rl = S + 163 fur Hub < 200 mm Rl = S + 213 fur Hub > 200 mm LAN5-2/LAN5-3/LAN5-4: Rl = S + 163...

4.1.3 Product characteristic curves and technical data LAN5, 24 VDC motor and 24 VDC higher speed motor version (24Q) Table 4.1 Technical data LAN5, 24 VDC motor and 24 VDC higher speed motor version (24Q) Model Max. holding Speed Standard stroke S [mm] force load = max/load = 0 [N] [mm/s] Duty cycle [%] Hall sensor resolution [mm/pulse]

5. Customer specific linear actuators From a purchase quantity of more than 50 pieces, the following additional options are available for the linear actuators. 1) Zero stroke length RL may change 2) A linear actuator with mechanical spline generates thrust forces only. Under tractive forces, the piston rod slides out of the linear actuator to its stop. The mechanical spline therefore helps to prevent damage or injury from forcefully dropping structures. 3) The plastic nut of the ACME thread screw drive is supplemented by an additional brass safety nut. The safety nut prevents uncontrolled...