WIRELESS SYSTEM FOR FUEL DISPLAYS DIFFERENT LIGHTING Data Sheet DEVICE FOR WIRELESS CONTROL OF PRICES AND MESSAGES ON THE LED DISPLAYS PRESENT ON THE PETROL STATION DESCRIPTION The CT100-W is not just a keyboard with a bright LCD display from which to type prices, but it is much more. By connec�ng the CT100-W to the POS, in fact, it can detect the prices of the products through the communica�on protocol selected from the many protocols available (see protocols on page communica�on protocols) and the command for changing graphics (where the protocol provides for it). The connec�on modes available: RS232; RS422; RS485. The CT100-W con�nuously sends the prices via radio waves, maintaining all the displays of the petrol sta�on always updated. A WT868-O receiver module must be installed on each display group ( Flags and totems ), up to a maximum of 32 units. Power supply Connect to LED display controller: PG BASE or HDP BASE POS Connect to POS by choosing: RS232 / RS422 / RS485 mode, All communication protocols are available and selectable (See connections to Page 2) Subject to change without notice, errors and omissions exepted. HITECHLED s.r.l. Via Galileo Galilei, 31 - 31048 S. Biagio di Callalta (TV) Italy

WIRELESS SYSTEM FOR FUEL DISPLAYS DIFFERENT LIGHTING Data Sheet CONNECTION TO THE POS USING ONE OF THE 3 AVAILABLE CONNECTION MODES Insert the cable and block It by closing the fairlead Mode RS232 DESCRIPTION Remove the back of box by unscrewing the 4 screws, insert the data cable and connect it to the 7-pole terminal block choosing one of the 3 available ways shown in the diagram, then lock the cable by �ghtening the ring nut of the cable gland and finally close the back of box. Connect the supplied power supply to the USB socket of the handheld. FOLLOW THE INSTRUCTIONS SUPPLIED FOR THE SETTINGS....

DIFFERENT LIGHTING WIRELESS SYSTEM FOR FUEL DISPLAYS Data Sheet CONNECTION OF THE WT868-O RECEIVER MODULE TO THE CONTROLLER OF LED PRICE DISPLAY II modulo WT868-O va installato in una posizione aperta, non coperta da parti metalliche, per esempio sulla parte superiors dei carter . Sul centro della base del modulo esce il cavo da collega-re alla scheda di controllo. Su 2 angoli del modulo sono presenti dei fori per il fissag-gio, utilizzare viti M3. Pag. 2/5 May 2022- rev.0 Subject to change without notice, errors and omissions exepted. HITECHLED s.r.l. Via Galileo Galilei, 31 - 31048 S. Biagio...

WIRELESS SYSTEM FOR FUEL DISPLAYS DIFFERENT LIGHTING Data Sheet WIRELESS sender device Features Power Communication modes WIRELESS receiver device Features Power Communication modes MAXIMUM DISTANCE The range of the system is approximately 100 linear meters. The receivers must be mounted in the upper part of the totems in such a way that the antenna is free from metal barriers. Subject to change without notice, errors and omissions exepted. HITECHLED s.r.l. Via Galileo Galilei, 31 - 31048 S. Biagio di Callalta (TV) Italy

WIRELESS SYSTEM FOR FUEL DISPLAYS DIFFERENT LIGHTING Data Sheet COMMUNICATION PROTOCOLS AVAILABLE AND SELECTABLE FROM THE CT100-W : LOGITRON GILBARCO 70RPLSUPSIT.E04 ( PASSPORT EUROPE ) GILBARCO ESTESO WAYNE DRESSER SYSTEM MARKETER PIGNONE SM2000/3000 WAYNE DRESSER NUCLEUS 8 (1200 BAUD RATE MONODIREZIONALE ) WAYNE DRESSER NUCLEUS 9 (9600 BAUD RATE BIDIREZIONALE ) WAYNE DRESSER ESTESO BIDIREZIONALE TOKHEIM KA ( KOPPENS AUTOMATIC ) ver. 4.2 SCHENK 68000/68020 ver.2.02 2400 BAUD RATE SCHENK 68000/68020 ver.2.02 4800 BAUD RATE MASER AUTOMATION IFSF LON WORK ( It needs an addi�onal interface ) Subject...

WIRELESS SYSTEM FOR FUEL DISPLAYS DIFFERENT LIGHTING Data Sheet EXAMPLE OF WIRING FOR A GROUP OF 3 LED PRICES DISPLAYS, INCLUDED A LED MESSAGE DISPLAY AND THE LED BARS FOR THE PRODUCTS INDICATORS BACKLIGHTING LED message display ( MSG series ) Flat cable Side A WT868-O PG BASE controller Side A DIESEL SUPER Connec�ons descrip�on The view of the back side of the price displays highlights the 1° Display 2 “IN” “OUT” connectors and the connector for the LED bar. The front view of the PG BASE controller highlights the two connectors for the LED price displays, side A and side B, the two connectors...