Hitech Stroke counter JL645 series

Product catalog summary

Product Introduction:
The JL645 is a general-purpose 5-digit mechanical counter designed for recording mechanical reciprocating movements. It lacks a zero return mechanism and resets from 99999 to 00000 to start a new counting cycle. The counter operates through an internal gear drive, activated by pulling the counter arm, which is connected to the propulsion mechanism.

Applications:
This counter is primarily used in industries such as switch and electric appliances, experimental equipment, printing equipment, and sealing machines.

Specifications:

Function: Stroke counter
Number of Digits: 5 digits
Display Digit Size: 4mm x 2mm
Display: White numbers on black
Count Mode: Adding in a stroke direction, 1 stroke = 1 count
Actuation Angle: >37° to <49°
Stroke Lever: Can be positioned on shaft at will and relocates automatically to start position
Ambient Temperature: -10℃ to +50℃
Stroke Frequency: ≤300 strokes/min
Measuring Range: 99999
Torque: ≤1N·cm
Dimensions (L x W x H): 31mm x 21mm x 32mm

Customization:
The product can be tailored with customizable mounting hole positions and base plate variations.

Catalog excerpts

JL645 counter is a general-purpose 5 digit stroke-type mechanical counter, used to accumulate and record the number of mechanical reciprocating movements, without zero return mechanism. When the record is full of 99999 and then from 00000 to start the next cycle of counting. The counting wheel of the counter is internal gear drive. When pulling the counter arm, and the arm connected to the propulsion mechanism to make the counting wheel for addition counting. This kind of counter is mainly used in the industries of switch and electric appliance, experimental equipment and printing equipment, sealing machine, etc.

Open the catalog to page 1

Hitech Stroke counter JL645 series

Hitech Stroke counter JL645 series

Catalog excerpts

All Hitech catalogs and technical brochures