Hitech Mechanical Counter JL085 series

Product catalog summary

Product Introduction:
The JL085 is a five-digit mechanical stroke counter designed to accumulate and record the number of mechanical reciprocating motions. It does not have a zero return mechanism and can count up to 99999 before restarting from 00000. The counter operates through an internal gear drive mechanism activated by pulling a counter arm. It is primarily used in high-voltage switching electrical products, test equipment, and printing equipment.

Technical Data:

Type: Stroke counter
Number of Digits: 5 digits
Display Size: 4mm x 2mm
Display: White numbers on black background
Count Mode: Adding in a stroke direction, 1 stroke equals 1 count
Stroke Range: Greater than 37° and less than 41°
Stroke Lever: Can be positioned on the shaft at will and automatically returns to the start position
Ambient Temperature: -10℃ to +50℃
Stroke Frequency: Up to 300 strokes per minute
Measuring Range: 99999
Torque: ≤4.18 N·cm
Dimensions: 43mm x 20.8mm x 34.3mm
Weight: Approximately 23g
Customization: Mounting hole positions and base plate variations can be tailored to specific needs.

Catalog excerpts

Hitech Mechanical Counter JL085 series-1

JL085 five-digit stroke counter is used to accumulate and record the number of times of mechanical reciprocating motion, without zero return mechanism. When the record is full of 99999 and then counting can start from 00000 for the next cycle. The counting wheel of the counter is internal gear drive. When pulling the counter arm, and the arm connected to the propulsion mechanism to make the counting wheel for addition counting. This type of counter is mainly used in high-voltage switching electrical products, but also can be used in test equipment, printing equipment and so on.

Open the catalog to page 1

Hitech Mechanical Counter JL085 series

Hitech Mechanical Counter JL085 series

Catalog excerpts

All Hitech catalogs and technical brochures