video corpo

Roughing End Mill : AME Type
12Pages

{{requestButtons}}

Catalog excerpts

Roughing End Mill : AME Type - 1

Roughing End Mill AME Type Grade for processing stainless-steel materials We have added to our lineup a sharp-edged insert for titanium alloy cutting. rther fu ution . istrib g sert d chatterin ized in es Optim suppress Nicked inserts enable suppression of chattering in heavy milling! JS & JM coatings provide long tool life. Low cutting force, general-purpose type; First recommended Nicked inserts Wave-edged inserts Sharp-edged inserts

Open the catalog to page 1
Roughing End Mill : AME Type - 2

Grade for processing stainless-steel materials Newly developed PVD technology provides improved layer adhesion and reduced layer peeling due to welding. Coating is optimized for stainless steel processing with reduced coating layer damage. High-toughness substrate is used to improve chipping resistance of cutting edge. KpPn'<S^|IjiL'3N"3"o ' Provides high-performance processing and long tool life in all areas of stainless-steel material processing. Electron micrograph I Level of film remaining Cutting time(min) WMilS W Cutting Conditions Cutting Speed Speed perflute Cutting depth Single-tip...

Open the catalog to page 2
Roughing End Mill : AME Type - 3

Roughing End Mill AME Type Super thick PVD coating ■ Epoch-making PVD coating membrane greatly suppresses cratering wear generated by high-efficient machining. 1 By using layer-thickening technology (*iP) for the PVD coating layer, wear resistance is greatly improved to provide long tool life. (Approx. 2x the tool life of conventional products) 1 In particular, improvements in machining efficiency for high-speed dry cutting can be expected. (Ex.: 1.5x the efficiency of conventional tools when cutting carbon steel) ■ Exhibits superior wear resistance when cutting carbon steels, general...

Open the catalog to page 3
Roughing End Mill : AME Type - 4

^Vy^P^^y Shank Type Side Lock Shank Combination Shank Item Code Side Lock Combination Shank •EP : IMttKS• : Stocked Items : Corner fe2.0 and fe3.0 can be used only for tip inserts s*;2 : When using corner fe3.0 it is necessary to perform additional machining of body corner areas. W-3 : When using nicked inserts, install 2 types of inserts (N2 type and N3 type) on a single holder Installing only N2 type inserts or only N3 type inserts on the holder will cause tool damage W-4 : When using nicked inserts on a 3-flute type shank, use 4 N2 type inserts and 8 Bore Type Item Code Sharp-edged...

Open the catalog to page 4
Roughing End Mill : AME Type - 5

Roughing End Mill AME Type f^ffl-fVit-h Insert Sharp-edged inserts K^"lV\— Screw Driver With Airhole ^When using corner rt3.0 it is necessary to perform additional machining of body corner areas as indicated below.

Open the catalog to page 5
Roughing End Mill : AME Type - 6

-*(Vtt—hO^^SO'ffl^ Features and Applications of Insert Selecting the appropriate breaker enables appropriate machining for various applications. Low cutting force, general-purpose type; First recommended ■ Nicked inserts enable low-resistance machining. 1 It has low resistance machining and suppresses chatter vibration even for deep cutting. Sharp-edged inserts ■ Enables shallow-depth, high-feed-rate machining. 1 Use of a wave-edged flute shape improves insert tip strength. ■ The sharp-edged insert is suited for high-efficiency machining of titanium. • Sharp cutting edge enables machining...

Open the catalog to page 6
Roughing End Mill : AME Type - 7

Roughing End Mill AME Type I #JMIt£fts Cutting Performance ■ Since AME adopted nicked insert, it is able to reduce cutting Nicked inserts l^ff Cutting Conditions 1 HS*)Oxk>) Feed Tooth(mm/t) Vn^jPI Titanium Cutting ■ By using a sharp-edged insert, free-cutting machining of titanium alloys has become possible. • Cutting performance is also good, and good chip removal is achieved. • Since machining is performed at low resistance, stable machining even at long extension amounts becomes possible and good tool life is achieved. Chip shape comparison Competitor's chip shape AME's chip shape...

Open the catalog to page 7
Roughing End Mill : AME Type - 8

"^"L/^^fcSyfDfln I ^ffil] Cutting examples of press mold Cutter body I (05O-4#KK WVO^^-f) Cutting scene Nicked inserts I Work material: Press mold cast steel I Air-blow, Depth constant trimming Cutter body I (063-6#CT> TttT^-f:?) Cutting scene Nicked inserts I Air-blow, Depth constant cutting Vn^PI0j!lPlTOJ Cutting Examples of Titanium Cutter body I (04O-4#CT> sJ^yO^^~T) Cutting Conditions Cutting scene Sharp-edged inserts Work material: Titanium Alloy Emulsion oil, Side cutting By using an insert for titanium alloy machining, 2 * the efficiency and 2 * the tool life was achieved. Cutter...

Open the catalog to page 8
Roughing End Mill : AME Type - 9

Roughing End Mill AME Type Example of 50% machining reduction (S45C) of side machining of plate mH-l'Vy' — hH Tool/Insert costs ■i>tt-h 1 ISfcDCD □-tU Corn* count per insert ZC^-^^iP^^ Tool replacement time . Machine cost Machining time per workpiece Machining cost per workpiece 2p Machining cost ratio (^/ICM) Min/Tool (^/ICM) Min/Tool Indexable tool roughing S) i)DI]MUfci1SiSTti©^T'"S"o Note: Comments from actual users.

Open the catalog to page 9
Roughing End Mill : AME Type - 10

^UtjUM^^OPJpl^ Overhang and Cutting range $]j&c!flfi ae Cutting width (mm) Cutting Conditions Wlj&frtiR ae Cutting width (mm) Machine used Insert With nick Work material Carbon Steels Cutting speed Feed rate ^For actual machining, adjust the cutting amount according to the cutting material and machine rigidity and tooling. I tDi'JjPXStbl^ Machined Surfaces Comparison ■ Both nicked inserts and wave-edged inserts provide good machined surfaces. Nicked Insert N2/N3 Breaker Wave-edged Insert FT Breaker Cutting Conditions Machine used Work material Carbon Steels Cutting speed Feed rate

Open the catalog to page 10
Roughing End Mill : AME Type - 11

Roughing End Mill AME Type Recommended Cutting Conditions MffllO Shoulder Milling tJJjA^BWHSli-fi^—yiBBroiOIifiilSBfcft^LUT^CcSOo For adjusting cutting amount, refer to the machining region curves on the right-hand page. (DmmuzWKtu. Mmum%iwmzi±< 'Am^i^tmzx-ox%m^^tit^j^ox\ -1--y [Note] ©This table shows general conditions for shoulder cutting. Conditions should be adjusted according to machine rigidity and tooling, workpiece condition, etc. ©To prevent tool damage due to chip clogging, always use a chip removal method such as an air blower, etc. ©Since there is a danger of discharged chips...

Open the catalog to page 11
Roughing End Mill : AME Type - 12

x.1$(D~r—^ISiitKISS©—flW. 8; Drawings, data in tables, etc. are examples of test results. 1. Cautions regarding handling (1) When removing the tool from the case (package), be careful not to drop it on your foot or drop it onto the tips of your bare fingers. (2) When actually setting the inserts, be careful not to touch the cutting flute directly with your bare hands. 2. Cautions regarding mounting (1) When preparing for use, be sure that the inserts are firmly mounted in place and that they are firmly mounted on the arbor, etc. (2) If abnormal chattering occurs during use, stop the machine...

Open the catalog to page 12

All MOLDINO Tool Engineering Europe GmbH catalogs and technical brochures

  1. EPBTS

    12 Pages

  2. EMXR

    16 Pages

  3. EMXA

    12 Pages

  4. EPDRF-TH

    12 Pages

  5. EPDBPE-ATH

    20 Pages

  6. SCE-R

    6 Pages

  7. RV type

    12 Pages

  8. ABPFN type

    6 Pages

  9. TD4N type

    8 Pages

  10. EHHB-ATH

    8 Pages

  11. EPCDS

    4 Pages

  12. GALLEA series

    24 Pages

  13. WHMB-TH

    12 Pages

  14. EPDRE-ATH

    24 Pages

  15. CBN-EHB

    12 Pages

  16. EHHBE-TH3

    8 Pages

  17. TD6N type

    12 Pages

  18. EB4HR-ATH

    12 Pages

  19. EHX

    12 Pages

  20. EPHB-PN

    8 Pages

  21. EHHRE-TH3

    8 Pages

  22. EDT

    16 Pages

  23. EHSE-TH

    8 Pages

  24. NSB

    12 Pages

  25. WHNSB-TH

    20 Pages

  26. EMSBS

    8 Pages

  27. GS4TN type

    4 Pages

  28. ABP4F

    8 Pages

  29. EPDBEH-TH3

    20 Pages

  30. JM4060

    4 Pages

  31. GX2140

    4 Pages

Archived catalogs

  1. CBN End Mills

    20 Pages

  2. Cutters

    10 Pages

  3. Reamers

    16 Pages

  4. HSS End Mills

    98 Pages

  5. Indexable Tools

    160 Pages