JM4060
4Pages

Catalog excerpts

Insert for milling of stainless steel : JM4060 For cutting stainless steel! Excellent coating adhesion provides long tool life. Newly developed PVD technology improves coating adhesion. Coating optimized for cutting stainless steel reduces tool damage due to sticking.

Open the catalog to page 1

Grade for cutting stainless-steels Newly developed PVD technology provides improved layer adhesion and less layer peeling due to welding. Coating is optimized for stainless steel processing and reduces coating layer damage. High-toughness substrate is used to improve chipping resistance of cutting edge. ipPn^S^|IjiL'3N"3"o ' Provides high-performance processing and long tool life in all areas of stainless-steel material processing. Layer adhesion WMilS W Cutting Conditions Cutting Speed Speed perflute Cutting depth Cutting time(min) Single-tip cutting SGJKPP Conventional...

Open the catalog to page 2

Insert for milling of stainless steel: JM40 ■ -Ott— MlEl^il * H^yji'J^ffil insert stock table-Recommended Cutting Conditions • : Stocked Items (IKVtr-hO^&P&I^TlV ®g®teffllc£3KM£K±Ur</c£^o [Note] CDThese conditions are for general guidance; in actual machining conditions, adjust the parameters according to your actual machine and work-piece conditions. ©In order to avoid of insert breakage, please change insert earlier. ©Do not use non-water-soluble cutting oils.Such oils may result in fire. ©Use the appropriate coolant for the work material and machining shape. ©The steel chips may cause...

Open the catalog to page 3

x.1$(D~r—^ISiitKISS©—flW. 8; Drawings, data in tables, etc. are examples of test results. 1. Cautions regarding handling (1) When removing the tool from the case (package), be careful not to drop it on your foot or drop it onto the tips of your bare fingers. (2) When actually setting the inserts, be careful not to touch the cutting flute directly with your bare hands. 2. Cautions regarding mounting (1) When preparing for use, be sure that the inserts are firmly mounted in place and that they are firmly mounted on the arbor, etc. (2) If abnormal chattering occurs during use, stop the machine...

Open the catalog to page 4