*mydirectindustry

cv14dbl

Product catalog summary

Overview of Multi Tool Accessories

This document provides a comprehensive catalog and specifications for various accessories compatible with Hitachi multi tools, including blades, sanding pads, and scrapers designed for different materials and applications.

1. Blade Specifications and Applications

The accessories include a wide range of blades categorized by blade type, dimensions, material, and intended use. Key parameters include:

Blade Dimensions: Width (10-100 mm), Length (20-100 mm), Thickness (0.4-4.0 mm)
Materials: Bi-metal blades, HM/TC (hard metal/tungsten carbide) teeth, titanium-coated edges, diamond-riff teeth for enhanced durability and cutting performance.
Applications: Edge cutting, plunge cutting, flush cutting, and routing for materials such as wood (softwood, hardwood, laminated panels), metal (including inox/stainless steel, nails, copper pipes), FRP, plastics, plasterboard, ceramic tiles, and insulation materials.

Blades are color-coded by workpiece type to facilitate quick identification and selection.

2. Accessory Types and Functions

Cutting Blades: Designed for precise cutting tasks on wood, metal, plastics, FRP, and ceramic tiles.
Scrapers: Rigid and flexible scrapers for removing caulk, paint residues, adhesives, and mortar.
Sanding Pads and Papers: Multi-tool pads compatible with various grit sanding papers (#40 to #240) for coarse to finish sanding on wood and metal surfaces.

3. Multi Tool Models and Features

The document references three Hitachi multi tool models:

CV 14DBL (14.4V Cordless)
CV 18DBL (18V Cordless)
CV 350V (AC-powered)

Key specifications:

Oscillation Frequency: Standard Mode 6,000 - 20,000 oscillations/min; AUTO Mode 15,000 to 20,000 oscillations/min
Oscillation Angle: 3.2°
Weight: 1.5 kg (CV 350V), 1.9 kg (CV 14DBL), 2.0 kg (CV 18DBL)
Overall Length: Approximately 280-307 mm

These models feature easy toolless accessory changes and Hitachi’s original AUTO Mode for optimized performance.

4. Standard Accessories and Packaging

Standard accessories vary by model and region but typically include:

Multi-tool blades
Sanding pads and papers
Tool box and carrying case
Battery and charger (for cordless models)

5. Color Coding and Identification

Accessories are color-coded according to the workpiece material (wood, metal, FRP, plastic, abrasive) to enable quick and accurate selection during use.

Critical Information and Best Practices

Select blades and accessories based on the specific material and cutting type (edge, plunge, flush, routing) to ensure optimal performance and tool longevity.
Use titanium-coated or diamond-riff tooth blades for cutting harder materials like stainless steel or ceramic tiles.
Utilize the sanding pads with appropriate grit papers for surface finishing tasks.
Leverage the easy toolless accessory change feature to improve workflow efficiency.
Refer to the color coding system to avoid using incompatible accessories on certain materials.

Catalog excerpts

Accessories for Multi Tools Hitachi Cordless Multi Tools Cordless Multi Tools Color Code by Workpiece The accessories are color-coded to quickly ﬁnd the desired ones! Wood Wood Metal Inox/Stainless steel Metal Multi Tool Hitachi Multi Tool Width A Length B Thickness Picture (mm) (mm) (mm) No. Work piece Work piece Multi Tool Blade Blade Type No. Edge cutting of wood Width A Length B Thickness Picture (mm) (mm) (mm) No. Titanium-coated edge Curved edge for less slipping and easy positioning Material : Bi-Metal Material : Bi-Metal Curved edge for less slipping and easy positioning Plunge cutting in softwood Plunge cutting in plasterboard Plunge cutting in softwood Plunge cutting in plasterboard Plunge cutting in softwood Plunge cutting in plasterboard Plunge cutting in softwood Plunge cutting in plasterboard Plunge cutting in hardwood Cutting laminated panels Plunge cutting in hardwood Cutting laminated panels Plunge cutting in hardwood and Oriented Strand Board Titanium-coated edge Edge cutting of wood Cutting nails and copper pipes Deep edge cutting Cutting nails and copper pipes Material : Bi-Metal Curved edge for less slipping and easy positioning Material : Bi-Metal Tooth material : HM/TC Tooth material : HM/TC Flush cutting of nails and copper pipes Specifications Model Cutting FRP, soft plastics and sheet metal (up to 1mm thickness) Oscillation Frequency Battery Voltage Standard Mode Dial 1 - 5 6,000 - 20,000 /min AUTO Mode Dial A 15,000 20,000 /min 3.2° Removing hard adhesive residues (Rigid scraper) Overall Length Weight Standard Accessories* Input Power Oscillation Frequency 350W Standard Mode Dial 1 - 5 Overall Length Weight Cutting FRP Cutting hard plastics Routing extra-thin joints on wall tiles Cutting FRP Cutting ceramic tiles Routing grooves in ALC Routing wide joints on ceramic tiles 6,000 - 20,000 /min AUTO Mode Dial A 15,000 20,000 /min Routing joints on ceramic tiles Charger (UC18YFSL) , Pad MU93D , Sanding Papers , Blades, Battery Cover, Tool Box, Carrying Case Oscillation Angle Removing caulk Removing paint residues (Flexible scraper) Standard Accessories* Pad MU93D , Sanding Papers , Blades , Tool Box, Carrying Case *Standard accessories may vary by country/area or speciﬁcations. Equipped with Hitachi’s original AUTO Mode Tooth material : HM/TC Flush cutting of nails and copper pipes Flush cutting of nails and copper pipes Cutting metals including inox/stainless steel, screws and nails. Cutting FRP Routing joints on tiles Plunge cutting Cutting FRP Routing joints on tiles Plunge cutting Routing joints on tiles with the edge and removing mortar or adhesive with the base when replacing tiles. (Available for corner cutting) Coarse-sanding of wood Removing mortar or adhesive Multi Tool Pad used with a sand paper for sanding wood/metal, removing rust /paint and ﬁnish -sanding Tooth material : HM/TC Tooth material : HM/TC Tooth material : HM/TC Back side Front side Sanding Paper Tooth material : Diamond-RIFF HITACHI CORDLESS MULTI TOOLS / HITACHI MULTI TOOL Tooth material : HM/TC Plunge cutting in wood Edge cutting of wood Cutting nails and copper pipes Cutting metals including inox/stainless steel, screws and nails. Tooth material : HM/TC Material : Bi-Metal Plunge cutting in hard ﬂooring/hard plastics Cutting aluminium Cutting FRP, soft plastics and sheet metal (up to 1mm thickness) Cutting polystyrene and insulation materials Cutting and removing caulk Sharp edge Plunge cutting in wood Cutting nails and copper pipes Cutting and removing caulk Sharp edge Material : Bi-Metal Wave edge Cutting FRP, soft plastics and sheet metal (up to 1mm thickness) Easy toolless accessory change! Sharp edge Cutting FRP, soft plastics and sheet metal (up to 1mm thickness) Cutting extruded polystyrene foam, rubber, polystyrene and insulation materials Hitachi’s original Cutting carpets, rubber and PVC Wave edge Sharp edge Material : Bi-Metal Material : Bi-Metal Inox/Stainless Steel & Metal Titanium-coated edge Material : Bi-Metal Wood & Metal Titanium-coated edge Material : Bi-Metal Material : Bi-Metal Diameter mm Grit Type Grit No. Multi tool for Hitachi multi tools

Open the catalog to page 1

All HITACHI KOKI catalogs and technical brochures

Power tools catalogue 2023-2024
1 Page

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list