ZAXIS-2 series HYDRAULIC EXCAVATOR Model Code : ZX10U-2 Engine Rated Power : 9.5 kW (12.9 PS) Operating Weight : 1 110 kg Backhoe Bucket : 0.022 m3

Rear end swing radius: 830 mm Minimum width: 910 mm With maximum foot extension: 1 000 mm n Rear end Swing Radius: 830 mm n Powerful Engine n Minimum Width: 910 mm Versatile excavator with adjustable width for efficient use in various applications—smooth movement in confined spaces, as well as powerful operation in open areas Compact Body with Short Rear end The compact short rear end design allows efficient operation even in confined spaces. Adjustable Foot Crawler and Blade The unit can extend up to 1 000 mm during jobs, thanks to the adjustable foot crawler. Folding Roll Bar (Rigid type) The...

Lock Lever Allows Lock/Neutral Engine Starting A lock lever lets you shut off not only Front & Swing but also traveling operation. A neutral engine start feature is also provided, allowing engine start only when the lock lever is at the lock position. Easy-Access Ignition Switch, Easy-View Monitor Simple, easy-to-understand status indicators. Two Travel Speeds Provided Two different travel speeds are available: high (4.0 km/h) and low (2.0 km/h)— making transport of the machine through the jobsite more efficient and smooth. A new tread pattern is adopted for the rubber shoe and operating vibration...

Folding/Retractable Seat Since the seat can be folded up, it can be used immediately after rainy weather, without the need for cleaning. Movement Principle of HN Bush Oil circulation HN bushing Pin Oil seeping into gaps Air holes Bushing (sintered particles) Main Frame Protects The Body from Shocks Single-unit counterweighted main frame effectively protects the body from unexpected shocks. HN Bushing Reliable, job-proven HN bushings are used at all pin joints at the front and the blade. The lubrication intervals have been extended to 500 hours, contributing to reduced scraping and grinding of...

WORKING RANGES Note: The illustration shows the ZX10U-2 equipped with 0.022 m3 bucket, 0.81 m arm and 180 mm rubber shoes. Unit: mm ZX10U-2 A Max. digging reach 3 220 B Max. digging depth 1 780 C Max. cutting height 3 010 D Max. dumping height 2 220 E Min. swing radius (At max. boom left swing) 1 310 (1 100) F Blade bottom highest position above ground 220 G Blade bottom lowest position above ground 190 H Max. vertical wall 1 670 I / I' Offset distance (Max. boom-swing angle) 420 (55)/535 (65) Sizes shown in parentheses apply when the crawler and blade are contracted. DIMENSIONS Note: The illustration...

Metric measure A: Load radius B: Load point height C: Lifting capacity A B C Notes: 1. Ratings are based on ISO 10567. 2. Lifting capacity of the ZAXIS Series does not exceed 75 % of tipping load with the machine on firm, level ground or 87 % full hydraulic capacity. 3. The load point is the centre-line of the bucket pivot mounting pin on the arm. 4. *Indicates load limited by hydraulic capacity. 5. 0 m = Ground. ZX10U-2 ROLL BAR VERSION, BLADE ABOVE GROUND Unit : 1 000 kg Conditions Load point height Load radius At max. reach 1.0 m 2.0 m meter Arm 0.81 m Rubber shoes 180 m 1.0 m 0.25 0.21 0.15...

Hitachi Construction Machinery www.hitachi-c-m.com These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in colour and features. Before use, read and understand the Operator’s Manual for proper operation. KS-EN020 07.06 (KA/KA,GT3) STANDARD EQUIPMENT OPTIONAL EQUIPMENT ENGINE • Neutral engine start system HYDRAULIC SYSTEM • Hydraulic pilot type control levers • Pilot control shut-off levers • Two-speed travel system • Piping for attachments...