ZW180
11Pages

Catalog excerpts

WHEEL LOADER Model Code: ZW180 Operating Weight: 14 220–14 710 kg Bucket Capacity: ISO Heaped: 2.2–3.3 m3 Max. Engine Output: 128 kW (171 HP)

Open the catalog to page 1

Three work modes and three driving modes help enhance operating ease and yield high production. What's more, lots of advanced designs give power and speed for loading and travel. The ZW Series will set a new standard of productive, easy-to-operate wheel loaders. Front & rear defrosters Easy draining Conveniently located filters High-torque engine and capacious Easy-to-replace air conditioning filters torque converter Enhanced upward visibility Torque proportioning differential Good rear visibility Strategically located Fuel supply port Ergonomically positioned switches and Easy-to-read...

Open the catalog to page 2

Packed with Numerous Technological Advances for Amazing Mobility and Big Production The new ZW Series is packed with lots of technological advances: the TT* system, newly developed hydraulic system and transmission, well matching of operations, impressive mobility and big production with less fuel consumption, and much more. *Total Torque-control Three Work Modes to Increase Production and Decrease Fuel Consumption Three work modes are selectable according to job needs and operator's preference. In each work mode, TT* system controls the total torque of the engine and pump for well matched...

Open the catalog to page 3

An Array of Elaborate Mechanisms for Impressive Mobility and Big Production Improved Rise / Run Performance Sophisticated Mechanisms for Higher Job Efficiency Float System Lift Arm Kick-Out System The float system lets the lift arm follow up road irregularities by using its selfweight only, without using its hydraulic circuit. This system is useful in soil-spill collecting during loading, and snow removing. The lift arm can automatically be raised up to the preset level. This function is convenient when loading onto a dump truck, and when operating at confined job sites with restricted...

Open the catalog to page 4

Operator-First Designs: Easy-to-Handle Controls for Operator Comfort Panoramic Cab Comfort-Designed Suspension Seat The panoramic cab gives almost allround visibility with the widened front glass window and pillar less cab rear corners. Front wheels are always in the operator's vision, enhancing safety and increasing loading efficiency. Enhanced Upward Visibility The front curved glass window gives good upward visibility, so the operator can directly see the movement of the bucket for safer loading. Bi-Level Auto Air Conditioner and Pressurized Cab Front / Rear Defrosters Ergonomically...

Open the catalog to page 5

Enhanced Durability Aluminum Radiator and Oil Cooler O-Ring Seal (ORS) Joints and Water-Resistant Electric Connectors Durability is enhanced with a number of advanced mechanisms for long, continuous operation. Hydraulically Operated Cooling Fan with Heat- Sensing System Dependable Drive System The radiator and oil cooler are made of aluminum instead of conventional steel or copper for corrosion prevention. On the indicators, monitors and alarms, many LEDs are utilized for longer service life resulting in less failure, enhancing the reliability. Numerous elaborate components are utilized for...

Open the catalog to page 6

Reduced Running Costs Easy-to-Read Monitor Reversible Hydraulically Operated Cooling Fan Running and maintenance costs are reduced greatly with concentrated inspecting points and durable components. Grease Groove The HN bushing containing high-viscosity oil is provided at each joint to reduce grease consumption, extend lubrication intervals (100 to 500 hours), and increase durability. With the easy-to-read monitor, the operator can see instructions for scheduled servicing and maintenance. Monitor Indication Items: Clock, service intervals, travel speed, mileage, hour meter Replacement...

Open the catalog to page 7

Safety-First Design Environmentally Friendly Design Achieving a High-Level of Safety in the Working Environment with an Array of Advanced Mechanisms A Cleaner Machine ROPS / FOPS Cab The ROPS / FOPS cab is provided to protect the operator from injury in an accident. The ZW Series is equipped with a clean but powerful engine to comply with Tier 3 and Stage III A. An engine emission regulations effective in the U.S. EPA and European Union from 2006. Exhaust gas is partly re-combusted to reduce particulate matter (PM) output and lower nitrogen oxide (NOx) levels. ROPS: Roll-Over Protective...

Open the catalog to page 8

Maximum power Engine output Engine torque POWER TRAIN computer-controlled automatic shift and manual shift features included Travel speed* (km/h) Forward / Reverse TIRES (tubeless,nylon body) Service brakes. Inboard mounted fully hydraulic 4 wheel wet disc brake. Front & rear independent brake circuit STEERING SYSTEM Minimum turning radius at HYDRAULIC SYSTEM Lift arm and bucket are controlled by independent control lever Bucket controls with automatic oucket return-to-dig control... Main pump/Steering pump.. Charging pump/Fan pump/ Hydraulic cylinders Four position valve; Raise, hold,...

Open the catalog to page 9

SPECIFICATIONS DIMENSIONS & SPECIFICATIONS Standard Arm General purpose Bucket type Overall length Overall length (Traveling figure) Overall height Width over tires Wheel base Ground clearance Tread Bucket width Turning radius (Centerline of outside tire) Loader clearance circle, bucket in carry position Overall operating height Height to bucket hinge pin, fully raised Dumping clearance 45 degree, full height Reach, 45 degree dump, full height Digging depth (Horizontal digging angle) Max. roll back at carry position Straight Static tipping load * Full 40 degree turn Breakout force Operating...

Open the catalog to page 10

WHEEL LOADER These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator’s Manual for proper operation. Hitachi Construction Machinery www.hitachi-c-m.com 07.05 (KA/KA GT3) Printed in Japan

Open the catalog to page 11