HYDRAULIC EXCAVATOR Model Code : ZX70-5G / ZX70LC-5G Engine Rated Power : 42.4 kW (56.9 HP) Operating Weight : ZX70-5G : 6 650 - 6 950 kg 　　　　　　　　 : ZX70LC-5G : 6 710 - 7 020 kg Backhoe Bucket : ISO Heaped : 0

The new ZX70 has evolved with a number of improvements including engine torque, durability and maintainability to earn more production and profits. It is rugged and sturdy for operation under tough environment, reducing downtime. Maintenance is also simplified to increase uptime. The new ZX70 empowers your visions and dreams, shaping your future. Benefits for Low Running Costs Shown equipped with an optional 4-side rainforced arm and pre-cleaner. More Production with Less Fuel Page 4-5 · 7% less fuel consumption · 22% more engine torque · Improved heat balance · Low-effort pilot lever Operator...

More Production with Less Fuel. Meeting Two Competing Needs 7% Down Fuel Consumption* 22% Increase in Max. Torque + Low Speed ZX70-5G ZX70 Engine Torque Isochronous Control Range Engine torque vs. engine min-1 Hitachi fuel-saving technology is more evolved than ever. The electronically controlled engine can curb fuel consumption behind the electronic governor, clutch fan, and isochronous control, which is one of fuel-saving technologies that can automatically control engine rpm through the electronic governor. This can suppress wasteful engine speed increase when big output is not needed, leading...

Enhanced Operator Comfort with Refined Controls and Cab Interior Highest Criteria of Sturdiness and Durability Gives Higher Productivity WC Thermal Spraying at Arm-Bucket Joint WC (Tungsten-Carbide) thermal spraying is applied on surfaces of the arm-bucket joint to form hardening layers to reduce wear and jerking significantly. Reinforced Bucket (Optional) The flat bottom type bucket protects its welds with wear plate. The 0.28 m3 reinforced bucket is provided optional with reinforcing plates at its bottom. WC thermal spraying at arm-bucket joint Reinforced bucket (Optional) New HN bushings at...

Hitachi Support Chain Hitachi Heritage of High Maintainability to Reduce Downtime Hitachi Support Chain is a full customer support system offered after buying a Hitachi machine. Parts and Service Fuel Double-Filters (Standard) Hitachi full customer support is available every area on the globe for full customer satisfaction through Hitachi local dealers. Fuel double-filters are utilized in a fuel line from fuel tank to engine to avoid plugging. Also, a solenoid fuel pump is provided standard to release air if water is mixed in fuel or fuel runs out. Extended Warranty — HELP Hitachi Standard Warranty...

Operating weight and Ground pressure HYDRAULIC SYSTEM Maximum traction force .. 47.8 kN (4 870 kgf) SERVICE REFILL CAPACITIES Shoe type Including bucket 0.28 m3 (ISO heaped) weight (211 kg) and counterweight (800 kg). BUCKET AND ARM DIGGING FORCES Hydraulic Cylinders *1 Reinforced bucket *2 With 600 mm / 700 mm shoes only © Suitable for materials with density of 2 000 kg/m3 or less O Suitable for materials with density of 1 600 kg/m3 or less ©Slope-finishing service — Not applicable

WORKING RANGES DIMENSIONS meter 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 10 987654321 0 meter Ground Line B: 2.5 m Unit: mm *Excluding track shoe lug BLADE (Optional) A Overall width of blade *Excluding track shoe lug Equipped with triple grouser shoe 450 mm Shoe type Including bucket 0.28 m3 (ISO heaped) weight (211 kg), arm 1.62 m and counterweight (800 kg). 12 13

Notes: 1. Ratings are based on ISO 10567. 2. Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm. 4. Indicates load limited by hydraulic capacity. 5. 0 m = Ground. For lifting capacities, subtract bucket and quick hitch weight from lifting capacities without bucket. ZX70-5G (Hj Rating over-front (Qju Rating over-side or 360 degrees Unit : kg

Notes: 1. Ratings are based on ISO 10567. 2. Lifting capacity does not exceed 75% of tipping load with the machine on firm, level ground or 87% full hydraulic capacity. 3. The load point is the center-line of the bucket pivot mounting pin on the arm. 4. Indicates load limited by hydraulic capacity. 5. 0 m = Ground. For lifting capacities, subtract bucket and quick hitch weight from lifting capacities without bucket. ZX70LC-5G (Hj Rating over-front Rating over-side or 360 degrees Unit : kg

MEMO Standard and optional equipment may vary by country, so please consult your Hitachi dealer for details. • : Standard equipment O : Optional equipment HYDRAULIC SYSTEM Boom anti-drift valve Control valve with main relief valve Lower cab front guard O OPG top guard Level I (ISO10262) compliant cab Pilot control shut-off lever • Seat : fabric seat O Seat : mechanical suspension seat O Seat : vinyl seat • Seat adjustment part : backrest, slide forward / back Fuel level float Hydraulic oil level gauge Rear view mirror (right & left side) Swing parking brake Tool box Undercover...

Built on the foundation of superb technological capabilities, Hitachi Construction Machinery is committed to providing leadingedge solutions and services to contribute as a reliable partner to the business of customers worldwide. Hitachi Environmental Vision 2025 The Hitachi Group released the Environmental Vision 2025 to curb annual Reducing Environmental Impact by New ZAXIS carbon dioxide emissions. The Group is committed to global production Hitachi makes a green way to cut carbon emissions for global warming while reducing environmental impact in life cycles of all products, and prevention...